-
VU+DUO
OK i know im being a numpty but wanted to change image on my box ,this is an original box by the way had it since they first came out, i know i know if it aint broke .... yady yaddy yaddy ,but me being me i tried , it went thro all the reading flash ,programming ,remove usb and reboot box , but it just keeps saying starting !!!!!!!! it does nothing else ,tried umpteen different usb sticks same message ,tried them in different ports, just nothing ive disconnected the internal hdd as well
wii #5344 2071 8397 4304
Hidden Content
Trust me the devil allways wins ,no matter how hard we resist
-
Flash the latest cfe on just like you do an image via usb
1. Unzip the duo_cfe_3_0_usb.zip to USB stick.(There should be /vuplus/duo/cfe_cfe_auto.bin) just put the vuplus folder onto usb stick
2. Insert USB stick into the USB port of duo and power on the box.
3. It takes just a few secs to update.
4. If Duo displays the message "Finished..reboot", remove the USB stick and restart box.
if it still don't boot flash the second image down on just like above
Hidden Content
D I S C LA I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
I am not responsible for what you do with it!
-
Post Thanks - 0 Thanks, 1 Likes
-
right ok tried all this does what it says on the box but still "starting" noticed the red light is still on do you think this 807 capacitator has blown?
wii #5344 2071 8397 4304
Hidden Content
Trust me the devil allways wins ,no matter how hard we resist
-
Looks like something has happened NAO, and "starting " with a red light usually states that the capacitor or resistor has went down m8
-
you got anymore Hidden Content
wii #5344 2071 8397 4304
Hidden Content
Trust me the devil allways wins ,no matter how hard we resist
-
-
ok my son in law gave me 2 new ones fitted it and still doing starting arggggggggggggh
wii #5344 2071 8397 4304
Hidden Content
Trust me the devil allways wins ,no matter how hard we resist
-
What about the chip that sits next to it Nao...check to see if there is any damage to it ??
-
Hidden Content Originally Posted by
wullboy
Hidden Content
What about the chip that sits next to it Nao...check to see if there is any damage to it ??
checked all the rest of chips they seem to be fine even checked them with a meter
wii #5344 2071 8397 4304
Hidden Content
Trust me the devil allways wins ,no matter how hard we resist
-
It has to be one or the other Nao, not heard of anything else that has given this problem apart for these two components
-
Try a different psu if you have one
D I S C LA I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
I am not responsible for what you do with it!
-
i managed to get hold of an ESR meter and checked the others ,they seem ok
wii #5344 2071 8397 4304
Hidden Content
Trust me the devil allways wins ,no matter how hard we resist
-
Just a thought Nao...take out any usb stick and hard drive you have on the box, and power it up and see if it helps
-
Hidden Content Originally Posted by
wullboy
Hidden Content
Just a thought Nao...take out any usb stick and hard drive you have on the box, and power it up and see if it helps
all were done at the start wull ,no usb or hdd connected
wii #5344 2071 8397 4304
Hidden Content
Trust me the devil allways wins ,no matter how hard we resist
Bookmarks