Thanks Thanks:  3
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 20 of 25
  1. #1
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84

    new image for DM600

    Can anyone suggest a new image for an original DM600, at the minute I'm using the same one I've had on it for years (PLI Jade) but nothing is clearing on the box at all. I can connect to the box, I've tried my other working sealion just to rule that out, FTA channels are working, I've tried rebooting the box, doing a transponder scan but still only FTA Channels are working, rather than reflash with the same image from years ago I'd like to try a newer one.
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  2. #2
    Retired Grumpy Grandad notanotherone's Avatar
    Join Date
    May 2006
    Location
    not far from you
    Posts
    6,915
    Post Thanks
    Chats
    589
    Rep Power
    68
    changing the image should not make a differance ive had the same image on mine since it first came out ive pm'd you
    wii #5344 2071 8397 4304
    Hidden Content
    Trust me the devil allways wins ,no matter how hard we resist

  3. #3
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    So can you suggest anything that might help rather than telling me what won't help ?
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  4. #4
    Retired Grumpy Grandad notanotherone's Avatar
    Join Date
    May 2006
    Location
    not far from you
    Posts
    6,915
    Post Thanks
    Chats
    589
    Rep Power
    68
    r u restarting the cam when you reboot box,you say 1 sealion works but am wondering if its maybe in conflict with your working one ,what i mean is when you take it out and put into your other box it means you will have 2 running (maybe)i know when i try this i have to have another one to play about with ,can you take the line from box thats not working and place it into the one thats working?
    wii #5344 2071 8397 4304
    Hidden Content
    Trust me the devil allways wins ,no matter how hard we resist

  5. #5
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    I have tried my working line ( the one from my DM800) in my DM 600, obviously I wasn't stupid enough to have both boxes using it at the same time, although even if I had been at worst the picture would freeze.

    The working line didn't clear in the dm600 either, so there's absolutely no point in me doing the reverse, ( as you've suggested) nothing is clearing on the DM600.
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  6. #6
    Retired Grumpy Grandad notanotherone's Avatar
    Join Date
    May 2006
    Location
    not far from you
    Posts
    6,915
    Post Thanks
    Chats
    589
    Rep Power
    68
    Wot about using another camd?what one you using the now?
    wii #5344 2071 8397 4304
    Hidden Content
    Trust me the devil allways wins ,no matter how hard we resist

  7. #7
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    cccam 2.3.0 checked the downloads via the blue button on the box and there isn't a newer one available in there.
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  8. #8
    Forum Supporter renwich's Avatar
    Join Date
    May 2006
    Location
    somewhere local
    Age
    58
    Posts
    2,052
    Post Thanks
    Chats
    2
    Rep Power
    22
    is the dm600 able to access the internet..? can you telnet to the box login and type ping 8.8.8.8 if you get replys then thats not the issue, please try and post back
    This Thread will help you understand the way this forum works Hidden Content
    This link will tell you all you need to know Hidden Content
    And if your still stuck use this link The following will answer all your questions Hidden Content

  9. #9
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    Erm renny its me your talking to, tell me what to do to telnet to the box and where do i type in 8888

    i can go on flashfxp and connect to the box no probs if thats any help ?
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  10. #10
    Forum Supporter renwich's Avatar
    Join Date
    May 2006
    Location
    somewhere local
    Age
    58
    Posts
    2,052
    Post Thanks
    Chats
    2
    Rep Power
    22
    what version of windows are you using on your pc
    This Thread will help you understand the way this forum works Hidden Content
    This link will tell you all you need to know Hidden Content
    And if your still stuck use this link The following will answer all your questions Hidden Content

  11. #11
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    Not sure if this is what you were meaning ?
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  12. #12
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    I'm using windows 7 btw and soz didn't see your Q until after I'd posted.
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  13. #13
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    @ renny done the ps -e again and there's none of them showing now, hope thats a good sign ?
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  14. #14
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    Have you tried re-flashing it with one one of the images here
    Hidden Content
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  15. #15
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    Hidden Content Originally Posted by berley Hidden Content
    rather than reflash with the same image from years ago I'd like to try a newer one.
    Hidden Content Originally Posted by fergalsworld Hidden Content
    Have you tried re-flashing it with one one of the images here
    Hidden Content
    They were uploaded in 2009 so no, hence the reason for asking if anyone knew of a newer one
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  16. #16
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    Hidden Content Originally Posted by berley Hidden Content
    They were uploaded in 2009 so no, hence the reason for asking if anyone knew of a newer one
    There is no newer one's than them as its an old box,
    try uninstalling the cam and re install it or a different version of cccam
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  17. #17
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    I've uninstalled and reinstalled CCcam
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  18. #18
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    I've completely fuxed this up, I flashed an openpli image, erased the flash with telnet then flashed with the browser, set it up as single disk or summit like that, pretty much pressed ok on everything, done a transponder scan, it found things, was watching bbc1 for about 10 mins, then i downloaded CCcam and CCCam.cfg, put my line in and saved it, transferred my saved channel list with dreambox edit, now nothing works including FTA so what have I done wrong ?

    This is what i flashed onto it OpenPLi-beta-dm600pvr-20141116
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  19. #19
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    tried flashing with dream up, opened dream up used com port 1 put a tick in "use network" all other boxes were blank (wouldn't let me input anything anyhow as i tried)pressed connect, got the message "connection prepared now switch on the dreambox" switched it on and got this message "is not a valid integer value"
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  20. #20
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    Try these 2 dreamups
    Hidden Content
    or
    Hidden Content
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

Page 1 of 2 12 LastLast

Similar Threads

  1. EPG for dm600
    By berley in forum Dreambox Satellite
    Replies: 7
    Last Post: 19-05-2011, 10:40 PM
  2. USB to Dm600 settings
    By ns77 in forum D600 models
    Replies: 1
    Last Post: 07-05-2010, 10:23 PM
  3. ex5000 / dm600
    By buckthehero in forum Cable Talk section..
    Replies: 5
    Last Post: 29-04-2009, 07:14 PM
  4. dm600 keeps locking up
    By Magnu420 in forum D600 models
    Replies: 5
    Last Post: 27-08-2008, 01:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •