-
Member
- Rep Power
- 13
HELP... System broken
So, I finally got round to updating openvix and its apparently broke my box
I copied all the files to the flash drive
put it in and rebooted
let it run through its procedures until it told me it was finished andto removethe flash drive andreboot
rebooted it
now it has a message on its little screen that says:
> Starting...
but nothing is happening
any ideas welcome
-
Member
- Rep Power
- 13
update on this
tried openvix 166 and that failed, also tried several others
I tried the original vix not the openvix and that seamed to install and work, so I'm guessing its software not hardware
any suggestions????
-
Is it a clone? is it just a duo or duo2
try a blackhole image, also try using a different usb stick
D I S C LA I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
I am not responsible for what you do with it!
-
Member
- Rep Power
- 13
hope its not a clone, paid full pops for it from a sponsor off here world of satellite I believe
just tried loading blackhole, its got further, it went through boot, and now its on a blue Vu+ Black Hole screen... in the bottom corner it says Starting gui, but its been on this screen about 10 minutes now, so I'm assuming that's failed too
-
Member
- Rep Power
- 13
oh read again, its just the duo
-
Hi jedex
If you keep on having problems with this box
I would say get hold of world of satellite were you got it from
and just explain the situation you are having with it.
I think they will help you get this back up and running
Regards Gazer
Hidden Content
Viewing Pay TV without a valid subscription is illegal!
All the files available on this forum are kept for experimental and educational purpose only!
Hidden Content
-
Post Thanks - 1 Thanks, 0 Likes
jedex thanked for this post
-
Member
- Rep Power
- 13
message sent to the sore and their forum
I bought my Vu from here around a year ago, excellent machine but the software has always bee a tad glitchy, but flashing usually improved it a little.
I noticed more updates so I flashed again Openvix 1.66
Everything appeared to go smooth and got the remove usb and reboot message
on rebooting it wont start up, just a message >Starting... and nothing else.
I've tried several different versions of the software and its the same every time
I tried the original Vix software and that worked fine, so I tried again with Openvix and it stopped at the same place
I've even tried Blackhole.. that went OK, went through all the booting screens but as soon as it got to the starting gui screen froze there
I've tried different flash drives etc.
Any help appreciated
-
When you flashed blackhole on and it said starting gui did you press the menu button and did anything come up or did it just hang on the blackhole screen?
what version of duo is it v2 or v3 it should say on the white sticker on the back of the box
D I S C LA I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
I am not responsible for what you do with it!
-
Post Thanks - 1 Thanks, 0 Likes
jedex thanked for this post
-
I would suggest you update the bootloader before flashing the newer images wont work otherwise.
Then try reflash the image again delete bootloader off the usb stick 1st.
Latest loader attached for VU+DUO
Welcome to World of Digital
__________
Hidden Content
_______________________________________________
I am glad we could help you with your problem if you need anymore advice just ask,
Also if you would like to help with the running costs of the site you can always donate click below
Hidden Content <<<< Click to Donate.
-
Post Thanks - 2 Thanks, 0 Likes
-
Member
- Rep Power
- 13
well would you believe it fixed itself
i was at work and wife said it kicked in on its own
everything seems ok apart from a few channels say tuning failed
just need to look up how to fix that and we're off again
thanks for your help
-
Hidden Content Originally Posted by
jedex
Hidden Content
well would you believe it fixed itself
i was at work and wife said it kicked in on its own
everything seems ok apart from a few channels say tuning failed
just need to look up how to fix that and we're off again
thanks for your help
Just do a scan or send these to the box using dreambox edit then restart enigma
D I S C LA I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
I am not responsible for what you do with it!
-
Post Thanks - 2 Thanks, 0 Likes
Bookmarks