-
Blade glitching
Here's the thing.I have 2 blade 7000s's,1 upstairs and 1 downstairs.The 1 upstairs is connected be Ethernet cable direct to 120mb super hub and glitches now and again,sometimes more than others.The 1 downstair is connected via 500mbps home plugs which are directly plugged in to wall sockets(no adapters or extensions).The 1 downstairs glitches so bad I was thinking of ditching it and going back to cable via a kryptview.My gifts are due to be renewed soon and I feel that I could buy an HD kryptview which would be more expensive initially but then most of the glitching would stop and at the moment it would be free.I have tried various Ethernet cables and home plugs without succsess.Anybody got any ideas how to reduce the glitching.I know it's not the blade and that it's the wireless signal coming from super hub via the home plugs.I don't want to hard wire the downstair 1 as it is to far away and anyway I feel it would not help the problem because of the distance.Upstair 1 is in bedroom 1 super hub is thro the wall in bedroom 2,downstair 1 is in living room which obviously is downstair.Thanks in advance.
-
The only thing i can suggest is try goinginto the router setting and try changing the broadcast channel see if that helps it.
D I S C LA I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
I am not responsible for what you do with it!
-
Post Thanks - 1 Thanks, 0 Likes
Bookmarks