Thanks Thanks:  9
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 20 of 32

Thread: Blade 7000.

  1. #1
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0

    Question Blade 7000.

    I'm new to the blade box flashed it with the latest firmware box is picking up all the channels but can only watch fta TV. Checked and double checked what i'm I doing wrong? I have just read I need a sealionHidden Content what do I do next?

    shaft56
    Last edited by berley; 27-09-2013 at 10:11 AM.

  2. #2
    Forum Supporter billy149uk's Avatar
    Join Date
    Jan 2013
    Location
    Bonnie Scotland
    Posts
    367
    Post Thanks
    Chats
    3
    Rep Power
    20
    You need to find someone who can supply a csealionHidden Content to you.They usually charge an annual fee for this.I pay ?120/year for this privilege which should get you all channels.Make sure you have the correct firmware in your blade by using your remote and pressing 9991 and see if you can access the secret menu.If you can't access it then you have the wrong firmware installed,make sure firmware says "patched".As for someone to supply a clionHidden Content ,ask around locally and try to find someone you can check out with other customers they have.
    Last edited by berley; 27-09-2013 at 10:12 AM.

  3. Thanks fergalsworld, shaft56 thanked for this post
  4. #3
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    Cheers bill145uk got the patched firmware loaded and got the secret menu. I will try and find a local cc cam provider.

    shaft56.

  5. #4
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    My head is buckled with all the ccam providers i'm from Glasgow area can anybody recommend me somebody?

    shaft56

  6. #5
    Forum Supporter Magnu420's Avatar
    Join Date
    Jun 2006
    Age
    58
    Posts
    3,188
    Post Thanks
    Chats
    0
    Rep Power
    38
    Hidden Content Originally Posted by shaft56 Hidden Content
    My head is buckled with all the ccam providers i'm from Glasgow area can anybody recommend me somebody?

    shaft56
    no talk about them on wod
    secrets of the dbox >>>Hidden Content

    if you find the posts are helpfull....click the thanks button....it dont cost anything

    Hidden Content



    Hidden Content

  7. #6
    Respected wullboy's Avatar
    Join Date
    Feb 2007
    Location
    North of the m6
    Posts
    1,826
    Post Thanks
    Chats
    39
    Rep Power
    34
    Hidden Content Originally Posted by shaft56 Hidden Content
    My head is buckled with all the ccam providers i'm from Glasgow area can anybody recommend me somebody?

    shaft56
    sorry m8, but google is your friend, nobody is allowed to put service providers on the forum, and your not allowed to talk about cardsharing, there is plenty out there, and there not ALL from the UK Hidden Content
    .................................................. .................................................. .
    LIFE`S A BITCH .......... THEN YOU DIE !!

    NEVER TAKE LIFE SERIOUSLY.... NOBODY GETS OUT ALIVE ANYWAY Hidden Content


    Hidden Content



    Hidden Content Hidden Content

  8. #7
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    Sorry i broke the rules.

    shaft56

  9. #8
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    Hi I got a test line put it in manually and it won't connect tried & tried again no joy any ideas?

    shaft56

  10. #9
    Biatch Moderator berley's Avatar
    Join Date
    May 2006
    Location
    Scotland
    Age
    62
    Posts
    8,399
    Post Thanks
    Chats
    71
    Rep Power
    84
    what folder did you put it in ?
    gяσωιηg σℓ∂ ιѕ мαη∂αтσяу; gяσωιηg υρ ιѕ σρтισηαℓ.
    If you would like to help with the running costs of the site click below

    Hidden Content
    Honesty is better than sugar coated bullsh!t

  11. #10
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    Hidden Content Originally Posted by berley Hidden Content
    what folder did you put it in ?
    It doesn't go in a folder as its a completely different setup on a blade Hidden Content
    @shaft are you sure you put them in correctly, you would be better putting them in a csinfo file in slot 0 and load it from the usb
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  12. Thanks berley thanked for this post
  13. #11
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    I copied the cclin into the 9991 menu and when i turned it on nothing happened .I also copied the cline onto my note pad do you include the N: before the line and do you have to rename it?

    Got the template will give it a go fingers crossed.

    shaft56

  14. #12
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    Hidden Content Originally Posted by shaft56 Hidden Content
    I copied the cclin into the 9991 menu and when i turned it on nothing happened .I also copied the cline onto my note pad do you include the N: before the line and do you have to rename it?

    shaft56
    Check the file i attached to my previous post, put your details in slot 0 then put it on a usb and load it through the menu's
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  15. #13
    Forum Supporter billy149uk's Avatar
    Join Date
    Jan 2013
    Location
    Bonnie Scotland
    Posts
    367
    Post Thanks
    Chats
    3
    Rep Power
    20
    If your stuck use fergalsworld suggestion.Open text file Fergal supplied with notebook on PC and replace info with the info that was supplied.Put on memory stick and plug into back of blade.Press menu on blade and go 3 to the right then down to download.Press ok then select file on screen and press ok.Job done.If it's still not working on any channel put in code for secret menu and make sure it says connected if not press the red button to connect.Remember test line is time sensitive.If not working get in touch with them and make sure it's still on.

  16. Thanks berley thanked for this post
  17. #14
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    Cheers guys will give it a go will let you know. Thanks again.

    shaft56


    No Good tried what you said the box still says disconnected.????
    Last edited by shaft56; 04-10-2013 at 12:06 PM.

  18. #15
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    Hidden Content Originally Posted by shaft56 Hidden Content
    No Good tried what you said the box still says disconnected.????
    You do have the box connected to your router via a ethernet cable?
    if you pm me the details (dont post it here) slot 0 from the cs info file i will check it for you
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  19. #16
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    @shaft did you manage to sort it?
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  20. #17
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    Hi Fergalsworld

    I got a new test line and it connected ok.

  21. Thanks fergalsworld thanked for this post
  22. #18
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10
    Hidden Content Originally Posted by shaft56 Hidden Content
    Hi Fergalsworld

    I got a new test line and it connected ok.
    Niceone happy viewing Hidden Content
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  23. Thanks shaft56 thanked for this post
  24. #19
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0
    Thanks i appreciate everyone's help.

    Maybe this will help other members when I got my test line and when I put it in connection_0 it wouldn't connect then I tried connection_1 and it connected instantly.


    shaft56
    Last edited by shaft56; 11-10-2013 at 07:18 PM. Reason: Update

  25. Thanks berley thanked for this post
  26. #20
    Member
    Join Date
    Dec 2006
    Age
    57
    Posts
    43
    Post Thanks
    Chats
    0
    Rep Power
    0

    info

    Hi Guy's

    Can this box take an internal hard drive? i don't want to open as it is security sealed.

    Shaft56

Page 1 of 2 12 LastLast

Similar Threads

  1. blade 7000
    By shawry99 in forum General Satellite TV
    Replies: 34
    Last Post: 18-09-2011, 01:23 PM
  2. eurovox ex 7000 hd help
    By broony2005 in forum Starview/Eurovox/Fta101/Replaybox/Kryptview
    Replies: 1
    Last Post: 14-02-2010, 07:18 AM
  3. @SAT NZ-CI 7000 reciver
    By Dr X in forum General Satellite TV
    Replies: 2
    Last Post: 27-05-2007, 08:07 PM
  4. help with dream box 7000
    By yunus in forum European Satellite
    Replies: 1
    Last Post: 25-01-2007, 09:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •