Hidden Content Originally Posted by
digitalman
Hidden Content
You will find the firmware with active channel list (which dont loop) in the follwing link:
rapidshare.com/files/447197266/HDS2_DUMP.abs
The following is a 'how to' that I followed to get my box up and running:
Transfer the file onto a usb stick insert into back of the box
click on menu and goto the tools menu again, scroll down to upgrade by USB and click start, after the loading is complete, accept the upgrade.
To add the line to get the box 'working' transfer the Cccam.cfg file to usb stick and place into back of the box
Now goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button.
Now select Update Files by USB and click the OK button.
Now select CCcam,cfg [CCcam Plug] and click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed.
If there is no tick displayed, select CCcam,cfg [CCcam Plug] and click the OK button.
Once the tick is displayed, click the Yellow button.
Now select CCcam Plug Setting and click the OK button.
Now select option 1 .. CCcam.cfg and click the OK button.
Now highlight each cline you wish to activate, by clicking the OK button, a
tick will appear next to each cline you have activated.
Finally check your Network Settings are configured correctly.
If your router supports DHCP turn it ON and click Apply.
If your router do not support DHCP you will be required to set it up manually, click Apply once you have set it up correctly.
Now reboot your receiver and that should be JOB DONE!
Bookmarks