This is a test fix been released for the EX1100, again it works to improve EPG.

Don't forget to do a factory reset after loading.

This is a beta so may not be 100% fix, so make sure you have a previous version available.

This is not a fix for N3

UPLOAD THE FIRMWARE THRU THE MENU OPTION,
Download the zipped file and unpack it with winzip or 7zip or similar
Put the extracted firmware on a USB stick formatted with fat32 (important) on your pc


now switch your box off and insert usb stick then switch box on again

Press -> Menu-tools-Upgrade by USB,
now highlight the firmware file and press RED to flash and OK to confirm.
10 seconds later, it's done .
once its flashed do a scan and let it update as normal


K*y update is on by default in software patches on the EX1100 usb

ps:-

remember to ALWAYS turn the power OFF before inserting or removing the usb stick.


Hidden Content