Fixes in this image: -
- fixed jittering
- change default remote speed
- remove problem channel list
- ECM menu on bookmark button
- update firmware options from LAN menu
Fixes in this image: -
- fixed jittering
- change default remote speed
- remove problem channel list
- ECM menu on bookmark button
- update firmware options from LAN menu
D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it.
Fixes in this image: -
- fixed jittering
- change default remote speed
- remove problem channel list
- ECM menu on bookmark button
- update firmware options from LAN menu
- support for 16G USB sticks
D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it.
TM600-UR-10-14-2009
Below 40 functions functions are not available in Dream box receivers
New s/w for tm-500/600/9100 Dated 14-10-2009-rel-2.0.23
-----------------
For tm-500-600-9100 we added hot key functions,Ect, as below
1-press info 2 times see signal and all other info also use arrow I/R for more info
2-Press LAN to see full LAN info,
3-Press RED batten to download softcam key...no need of doing one by one from each sight..auto find about 5 sights.
5-Press < bellow number 7 to update LAN connection
6-press edit direct access to edit menu
7-press UHF direct to uhf menu also you can see uhf channel number in the front panel
8-To download s/w {image } no need of any password or control centre ..hold standby batten and turn on from rear see 2 or 3 digits of box ip ..
then use explorer in windows type 192.168.1. Huh then last digits of box ip press enter ..that's all.
9-for C:line F:line and other upload download use same as number 8
10-RF modulator 65 db gain
11-RGB loop from 2 scarts
12-Image download direct ..no need of pc [ press LAN/MENU/0/MENU ] For test s/w
for finished s/w press LAN /blue batten
13-press blue batten 2 times see choice of cams/old cams/extras /channel lists up to date
14-press ok then I/R to see list and change channel
15-Delete channel list direct..press blue batten then go to add-on manger highlight the list press red batten to delete..no need factory rest or re boot.
16-To test if LAN connected or not..press LAN batten ,,you can see in the front panel neon bulb going up/down trying to re connect or giving message some thing wrong.
17-sat batten ..direct access to satellite list
18-Diseqc and usals works 100% perfect for motorised dish.to increase speed when motor moving in 18 volt Horizontal ,
19-Internal power supply
20-54 key functions remote control
21-8 Functions front panel keys.
22-10-segments front display
23-6-sofcams cams installed automatically.
24-quick factory reset,25-Sound qaulty improved by using high qaulity HIFI pre amlifire Line out as well as optical out,
-------------
For TM-600 USB PVR above and bellow
26-USB batten direct to USB menu
27-one batten record and stop.
28-3- USB to pvr all can record play
29-Press File list batten for all your recording.
30-Press info 2 times then 123 see choice of cams to read your card id.
40-components out putto increase picture quality.
-------------------------
TM-9100 Bit different
To use mini web for downloading and uploading after s/w dated 14-10-2009
1-hold on/off standby batten {your finger doing off/on constantly until you see box ip }then turn on power from rear until you see box ip the do the same as number 8 and 9
2-press help to see LAN menu
3- press arrow on the top of the stop batten to re fresh LAN.
D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it.
Bookmarks