recently sports 2 wouldn't work now all 1,2,3, won't work
tried re scanning and re boot that dosn't work
500c dw 2 image
any suggestions
recently sports 2 wouldn't work now all 1,2,3, won't work
tried re scanning and re boot that dosn't work
500c dw 2 image
any suggestions
i`ve had this myself now & again and i`ve got a d box, try pulling mains out then go back up and sit on one of the channells for a few minutes, that can sometimes clear it,
.................................................. .................................................. .
LIFE`S A BITCH .......... THEN YOU DIE !!
NEVER TAKE LIFE SERIOUSLY.... NOBODY GETS OUT ALIVE ANYWAY Hidden Content
Hidden Content
Hidden Content Hidden Content
tried that best, still no good
Then go for a re-flash, that will bring them all back ??
.................................................. .................................................. .
LIFE`S A BITCH .......... THEN YOU DIE !!
NEVER TAKE LIFE SERIOUSLY.... NOBODY GETS OUT ALIVE ANYWAY Hidden Content
Hidden Content
Hidden Content Hidden Content
the female connection on the box wasn't tight enough
so i pinched it together with some pliers, it is working better
now but still no sp 2 so i will re flash it
before you do a brutescan mate you should make sure to only have the direct feed from the wall plugged into your dreambox, no splitters, no nuffin, just the one single cable feed from the socket on the wall directly into the dreambox, then do a brutescan, that usually allways gets you all the channels on your scan, then afterwards you can connect any splitters etc that were previously fitted, let us know how you go and if you have any picture breakup etc, i know that when i first got my dreambox all em years ago i had to buy a signal booster straight away as my signal sucked etc.
p.s
and yes, always make sure the connections into the dreambox are solid and not loose at all as the dreambox can be very tempremental with things like that.
id a brutescan with a direct feed still missing sp2 and couple of others as they worked ok before there must be something else going on ?
strange mate, usually thats a sign of a weak signal, whats your signal levels at ?
does the actual channel get found but just not displaying or what ?? and did you do another flash with a more updated image ?
have you tried going into the box options and tried changing the tuner selection and cam etc mate then do a brutescan ???
also a mate of mines says hes using dk 1.1 image and its great, might be worth a try.
p.s
i would avoid the dW images mate, just my opinion and several mates too.
Last edited by berley; 04-05-2009 at 10:08 PM. Reason: merged, please use edit button when posting a few mins apart
yes the channel is there but no picture, changed the tuner
selection also, i will probably go for the earlier version of dw image see how that goes
try changing or restarting the cam too mate, or get a new flash image that has a different cam, sounds like a cam problem (maybe)
use a *igital *aos image mate as a trial rather than the dw images.
used the *igital *aos image everything works perfectly
apart from....sp2 bizare!
Bookmarks