Thanks Thanks:  0
Likes Likes:  0
Page 1 of 3 123 LastLast
Results 1 to 20 of 44
  1. #1
    Member
    Join Date
    May 2006
    Posts
    36
    Post Thanks
    Chats
    0
    Rep Power
    0

    Key Rolling Nov 08 - no posts discussing if keys work or dont work please - wait!

    this isnt the fisrt time over tha last week since the re-apearance of the sky channels ie sky 1 ect , my box has been a little bit touchy , ie during the day you will loose all channels apart from FTA , this then could be quickly fixed by a reboot and all good , now today same thing at aprox 01:30 am box lost all channels apert from FTA. any ideas or is box dead.

    im using laky pro image ,
    loaction birmingham
    nokia dbox2

  2. #2
    Senior Member digitalman's Avatar
    Join Date
    May 2006
    Location
    With the WIFE!!!!!
    Posts
    474
    Post Thanks
    Chats
    0
    Rep Power
    18

    Re: FTA channels only

    your not the only one, only difference is mine went this morning at about 1020ish - last time this happened approx 4 weeks ago it went for about one and a half hours though!

  3. #3
    Senior Member digitalman's Avatar
    Join Date
    May 2006
    Location
    With the WIFE!!!!!
    Posts
    474
    Post Thanks
    Chats
    0
    Rep Power
    18

    Re: FTA channels only

    its prob just in our general locality im in Wolves you in Bham (ex telly) where there is a prob if it were widespread we would have alot more members on this thread?

    I stand corrected, more and more reports of fta only!
    Last edited by digitalman; 27-11-2008 at 01:04 PM. Reason: typo

  4. #4
    Member
    Join Date
    Dec 2007
    Posts
    51
    Post Thanks
    Chats
    0
    Rep Power
    17

    Re: FTA channels only

    Hidden Content Originally Posted by digitalman Hidden Content
    its prob just in our general locality im in Wolves you in Bham (ex telly) where there is a prob if it were widespread we would have alot more members on this thread!
    Ive no doubt it will sort itself out within the hour! Hidden Content
    lots posting on other places not local its nation wide

  5. #5
    Member
    Join Date
    May 2006
    Posts
    36
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: FTA channels only

    yeh im guessing its a new key roll again , just have to be patient and await to see what develops .

  6. #6
    Senior Member digitalman's Avatar
    Join Date
    May 2006
    Location
    With the WIFE!!!!!
    Posts
    474
    Post Thanks
    Chats
    0
    Rep Power
    18

    Re: FTA channels only

    You will get nothing less on this site, peeps on this site do nothing but help (im sure everyone would acknowledge that from personal experience otherwise you would not be back on this site!).

    When they have news as to what you can do or what the actual situation is, you can be safe in the knowledge that they will let us all know.

  7. #7
    Member oscarthegoldfish's Avatar
    Join Date
    Jul 2007
    Posts
    31
    Post Thanks
    Chats
    0
    Rep Power
    0

    Smile Re: FTA channels only

    Manual change keys through tuxbox commander, get channels back.
    looks like the auto update gone again.
    hope this helps

  8. #8
    Member
    Join Date
    May 2006
    Posts
    36
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: FTA channels only

    i have a the updated keys via keymaster , its just been so long , iv forgotten were i imput them

  9. #9
    Forum Supporter Hunter's Avatar
    Join Date
    May 2006
    Location
    Gainford, County Durham
    Age
    60
    Posts
    1,837
    Post Thanks
    Chats
    0
    Rep Power
    19

    Re: FTA channels only

    Hidden Content Originally Posted by grimbk Hidden Content
    i have a the updated keys via keymaster , its just been so long , iv forgotten were i imput them
    keylist.txt
    Hidden Content

  10. #10
    Member BLACKJACK's Avatar
    Join Date
    Jul 2006
    Location
    Scotland
    Age
    45
    Posts
    132
    Post Thanks
    Chats
    0
    Rep Power
    18

    Re: FTA channels only

    i fixed mine in lanarkshire with manual input.They like playing with these boxes don't they.
    Hidden Content A Question is only hard if you do not know it.

  11. #11
    Junior Member
    Join Date
    Jun 2006
    Posts
    1
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: FTA channels only

    Mine in Derby went about 13:00. Manually entered now up and running. Have to wait and see for how long.

  12. #12
    Administrator fergalsworld's Avatar
    Join Date
    May 2006
    Posts
    8,495
    Post Thanks
    Chats
    0
    Rep Power
    10

    Re: FTA channels only

    Hidden Content Originally Posted by grimbk Hidden Content
    im in the birmingham area so i tried using the keys lited under TW ,
    i havnt tried the others
    Check what you are here and did it save the changes you made after you rebooted the box
    also make sure you are running evocamd if you have edited the k*ylist.txt file
    Hidden Content
    Last edited by fergalsworld; 27-11-2008 at 05:32 PM.
    D I S C LA I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  13. #13
    Member chmod-uk's Avatar
    Join Date
    Sep 2006
    Location
    UK
    Posts
    57
    Post Thanks
    Chats
    0
    Rep Power
    18

    Re: FTA channels only

    Based on evocamd, turn off au update in /var/keys/camd_cfg (00) with tux commander. Again use tux commander to input the correct keys from ******, put in /var/keys/Keylist.txt. Restart camd and you're good. Wait a while for the proper auto update fix...

  14. #14
    Member BLACKJACK's Avatar
    Join Date
    Jul 2006
    Location
    Scotland
    Age
    45
    Posts
    132
    Post Thanks
    Chats
    0
    Rep Power
    18

    Re: FTA channels only

    [QUOTE=fredsuthers;152368]Now that \/1rg1n are going to make changes to the rom on a daily basis, according to reports, will it be difficult to come up with a solution like the one that took a week earlier this year?



    The keys should not be that different just 2 to edit on each line.That what i done anyway did u turn it on and off and the keys changed and then you edit the 2 lines.
    Hidden Content A Question is only hard if you do not know it.

  15. #15
    veteran nj2006's Avatar
    Join Date
    May 2006
    Posts
    1,179
    Post Thanks
    Chats
    0
    Rep Power
    19

    Re: FTA channels only

    Hidden Content Originally Posted by fredsuthers Hidden Content
    Now that \/1rg1n are going to make changes to the rom on a daily basis, according to reports, will it be difficult to come up with a solution like the one that took a week earlier this year?
    Hidden Content
    whos mothers brother's sister cousins dog told you they will update roms on a dialy bases ???

    if what you say is true then i could only see internet updates bieng the future. in my opinion.

    but really they can only change the rom set a couple of times

    im sure sombody will come up with a solution

  16. #16
    Member DejaVu's Avatar
    Join Date
    Dec 2006
    Posts
    26
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: FTA channels only

    nagra file.

    Use GBox.

  17. #17
    Member fredsuthers's Avatar
    Join Date
    Sep 2006
    Posts
    47
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: FTA channels only

    Hidden Content Originally Posted by nj2006 Hidden Content
    whos mothers brother's sister cousins dog told you they will update roms on a dialy bases ???
    if what you say is true then i could only see internet updates bieng the future. in my opinion.
    but really they can only change the rom set a couple of times
    im sure sombody will come up with a solution
    This one (no offense to the author):
    Hidden Content

  18. #18
    veteran nj2006's Avatar
    Join Date
    May 2006
    Posts
    1,179
    Post Thanks
    Chats
    0
    Rep Power
    19

    Re: FTA channels only

    Hidden Content Originally Posted by fredsuthers Hidden Content
    This one (no offense to the author):
    Hidden Content

    oh then that be a good source. Hidden Content

  19. #19
    Member
    Join Date
    Apr 2008
    Posts
    37
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: FTA channels only

    Time to get your manuals out from last time gents!

    It's an easy process to suss it out if you like these kind of problems and a bit safer than downloading the toolbar, which can have some nasty bitbobs on it!

  20. #20
    Member jancarius's Avatar
    Join Date
    May 2006
    Posts
    30
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: FTA channels only

    Hidden Content Originally Posted by hotlipz2001 Hidden Content
    DANRIL you say there is another way then downloading the toolbar, what is it? I tried to down load the tool bar but get an error so i'm stuck as i can not see the code for my area !
    download keymaster just tried it works 100%

Page 1 of 3 123 LastLast

Similar Threads

  1. Hi all my m8 got have an Openbox 11 to get the $ ch dont work
    By ilovenzb in forum Openbox S9 S10 and Solomend
    Replies: 8
    Last Post: 14-11-2016, 12:24 AM
  2. new dbox dont work
    By zx636rider in forum Cable Dbox2
    Replies: 18
    Last Post: 18-07-2007, 02:42 PM
  3. Will Keys from Dbox work on Starview
    By mickyrobbo in forum Starview/Eurovox/Fta101/Replaybox/Kryptview
    Replies: 3
    Last Post: 31-05-2007, 12:33 AM
  4. 4mb dont work
    By d3putydawg in forum Cable Modem Talk
    Replies: 3
    Last Post: 04-08-2006, 10:00 AM
  5. Newer images dont work
    By grant in forum Cable Dbox2
    Replies: 5
    Last Post: 07-07-2006, 05:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •