Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    Jan 2008
    Posts
    25
    Post Thanks
    Chats
    0
    Rep Power
    0

    rom11 nagra problem

    hi, have unlocked a rom 11 bod, trying to read it in nagraedit and get this:


    Opening of COM1 was successful
    ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
    30 31 31 20 52 65 76 42 30 44 3C
    ROM Revision: 011
    EEPROM Revision: RevB0D
    ProviderID: 5C
    CamID: 27 ** ** **
    Using BD3 Key: ****************************88
    Attempting to login to BD3
    BackDoor login verified
    Dumping Dataspace
    Reading ROM11 failed
    Closing of COM1 was successful


    its stays on 'dumping dataspace' for a few seconds then fails, i can read the card ok in xncs, thanks
    Last edited by fergalsworld; 25-04-2008 at 11:58 AM. Reason: edited some details out for you

  2. #2
    Member
    Join Date
    Jan 2008
    Posts
    25
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: rom11 nagra problem

    or does bod mean it is still locked? would it be ok to unloop it again

  3. #3
    Elite Member Sicilian's Avatar
    Join Date
    Nov 2006
    Age
    53
    Posts
    4,122
    Post Thanks
    Chats
    0
    Rep Power
    22

    Re: rom11 nagra problem

    By what you've posted I belive it still need unlooping.

    Have you already unlooped? Sometimes it states unlocked but needs to be done again.
    D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it.

  4. #4
    Member
    Join Date
    Jan 2008
    Posts
    25
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: rom11 nagra problem

    ok il try again and get back

  5. #5
    Member
    Join Date
    Jan 2008
    Posts
    25
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: rom11 nagra problem

    will the revision change when it is properly unlocked?

  6. #6
    Elite Member Sicilian's Avatar
    Join Date
    Nov 2006
    Age
    53
    Posts
    4,122
    Post Thanks
    Chats
    0
    Rep Power
    22

    Re: rom11 nagra problem

    Sorry, just saw that you can read the card in xcns so have you tried mrom to clean the card? But make sure you have all the details you need from the card first.
    D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it.

  7. #7
    Member
    Join Date
    Jan 2008
    Posts
    25
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: rom11 nagra problem

    tried mrom with different delays but i get
    a fazer reset ao cartao... erro
    phoenix nao responde
    erro na do cartao

    i know the programmer and phoenix are working ok

  8. #8
    Member
    Join Date
    May 2006
    Posts
    40
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: rom11 nagra problem

    i have always found that xncs works a treat once the card has been unlooped. if all else fails try unlooping it again and use xncs to read the card,

  9. #9
    Member warez5's Avatar
    Join Date
    Aug 2009
    Posts
    66
    Post Thanks
    Chats
    0
    Rep Power
    15

    Re: rom11 nagra problem

    Hidden Content Originally Posted by teracir Hidden Content
    i have always found that xncs works a treat once the card has been unlooped. if all else fails try unlooping it again and use xncs to read the card,
    I wouldent try to unloop it again m8 you will fry the card!

  10. #10
    Respected mickyrobbo's Avatar
    Join Date
    Feb 2007
    Location
    In The Land of Swall
    Age
    52
    Posts
    804
    Post Thanks
    Chats
    0
    Rep Power
    18

    Re: rom11 nagra problem

    Hidden Content Originally Posted by slickrick Hidden Content
    hi, have unlocked a rom 11 bod, trying to read it in nagraedit and get this:
    Opening of COM1 was successful
    ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
    30 31 31 20 52 65 76 42 30 44 3C
    ROM Revision: 011
    EEPROM Revision: RevB0D
    ProviderID: 5C
    CamID: 27 ** ** **
    Using BD3 Key: ****************************88
    Attempting to login to BD3
    BackDoor login verified
    Dumping Dataspace
    Reading ROM11 failed
    Closing of COM1 was successful
    its stays on 'dumping dataspace' for a few seconds then fails, i can read the card ok in xncs, thanks
    Just keep clicking the read button in nagraedit m8 have you got you details since you have said you can read it in xncs,if so it is unlooped ,,if not use get my bksidewinder script by tbc

Similar Threads

  1. Nagra 3 FAQ
    By Magnu420 in forum Cable Talk section..
    Replies: 10
    Last Post: 24-09-2010, 09:37 PM
  2. Rom11 Problem
    By Stantheman in forum Cable TV Mosc (rom)
    Replies: 3
    Last Post: 10-04-2008, 10:11 PM
  3. nagra edit problem
    By vincewrd in forum General Cable T.V
    Replies: 20
    Last Post: 24-02-2008, 09:46 AM
  4. nagra 2
    By scotia in forum General Cable T.V
    Replies: 10
    Last Post: 16-01-2008, 12:53 PM
  5. Nagra IRD
    By steve5815 in forum General Cable T.V
    Replies: 4
    Last Post: 14-06-2007, 05:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •