Ok as there seems to be a lot of members asking questions in way of how to change codes and whats the password ect ect on these recivers, we here at WOD have decided to offer you all some help in way of helping yourself and geting any issues that you might have resolved.
Please remember this information if to be used for education testing only, and we in no way want people to use it to gain such channels that require paying blaa thee blaa blaa.
-----------------------------------------------------------------
FTA 101 HOW TO GUIDE
ok here we will run thru on how to enter the codes for the fta101
Press MENU then press "-> ->" and go down to were it says code and press the "OK"
In the password box enter "1010" which is the default password for all FTA101 boxes, and then press the "OK"
This will now take you to a section called "CAS SYSTEM MENU" just scroll down to were it says "NEGRAVOSION" and press the "OK"
Now you should see 3 boxes of numbers and letters and just above this a provider name, for me it would be "NTL" but you will need to press the right arrow key till you get to your provider that you use.
Now hightlight the provider that you use and and now below this you should have and see 2 key numbers "key1" and "key2"
Just hightlight the "key number" press "->" and it should move between 00 and 01 ect
Just remember that 00 = key1 and 01 = key2
Now set it to "00" which is key1 and press down to "key" and now enter the key that is in use for your provider and then repeat the same thing again for key2 which is 01.
When you have entered all the revelent keys for 00 key1 and 01 key2 press ok to store the codes you have just put in.
Then you just press the exit for three (3) times to save all the info and then its back to your viewing plesure once again.
Dont panic if your box does a quick scan as some do this, but then the channel will come on and its back to enjoying viewing.
-----------------------------------------------------------------
STARVIEW BOX
Ok this one works in the same way as others, but each has a different password and type of menue system.
Ok press the menue on the remote, and goto PARENTAL CONTROL and press the OK button.
When you are in the Parental Control menue you need to press the INFO button on the remote and then type in 2004 or your reciver might need code 1570.
Now a new hidden CAS SYSTEM will pop up, and you need to make sure that the KEY EMU is switched to ON.
Now goto the NAGRAVISION part and press OK on the remote.
Now go across the the provider that you use, and then choose the KEY NUMBER to select the key type, IE 00: or 01: and then simply go down to were it says KEY DATA and enter the key data keys and save.
Once you have put in the both sets of keys for KEY NUMBER 00: and KEY NUMBER 01: just press the EXIT till you come out of the menue system, and enjoy your viewing as same as before.

-----------------------------------------------------------------
OK another thing for members to remember is that keys will not be posted on the forum, but there is a way that you can get them, and its quite a simple way, and they are here on the forum for you to use.
What you have to do is the following if you want them........
look in funcard downloads section and look to the stickys for your area rst hex file for fun card, and download it.
Then use eather rst viewer or rst updater to open the file and view the new codes and use them.
Remember to use the codes for your provider not for another one as they wont work.
Regards
Dr X Hidden Content