ber 262143
snr 59367
sig 33667
bitrate 2379 but it moves allover the place
any help would be great i bought a booster but how do i use it correctly thanks
ber 262143
snr 59367
sig 33667
bitrate 2379 but it moves allover the place
any help would be great i bought a booster but how do i use it correctly thanks
Not so hard mate . Attatch your f type connector to your incoming cable feed,then connect this to the input or ant on your booster then just come out of tv 1 the other end and into your d box connection . If it has varible gain ajustment try it all the way up and then reduce it till you have the best signal Good luck Paul
ok ive tryed that i have even took it to my mate who as a dbox and the rates are still the same how come do i need to replace a part or do something else thanks
Did your box used to work and now it dosent or is one you have just got and you have never seen it working?
D I S C L A I M E R; My right to post information is protected under the rights for freedom act. In all instances information discussed here on my posts are either hypothetical, out of general curiosity, for educational purposes or testing only. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. The user Timoweb is not responsible for what you do with it!
read my signature m8
This Thread will help you understand the way this forum works Hidden Content
This link will tell you all you need to know Hidden Content
And if your still stuck use this link The following will answer all your questions Hidden Content
your looking for a booster that can be adjusted . i found one in asda ?8.97 its a phillps . your booster isnt strong enough to damp the ber down. unless it can be adjusted.
i wouldnt of said you dont have a tuner problem more of a wiring problem maybe a sagem 1x box in a builtup area that all shares its cable down one line.
hi ive got a booster the sLX with the dial to move about but when i connect it all up nothing happens cant even get radio or anything i got it from argos. i put like 6 diffrent images on, some times i get a pictuer for like 3 seconds than it turns black the radio stations work fine could it be the tuner, i have a spare sly box if thats any help maybe i could take parts out of that
turn the dial on the booster .
i turn dial but when im on that page where it show the sig ber, nothing happens ive done it stright from the white box no splitters or anything ive tryed turning the thing loads of times but nothing at all could it be the tuner???
in the white box on the wall will be a isolator/splitter take it out of the loop
see if it improves the readings.
Try with and without the booster.
D I S C LA I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
I am not responsible for what you do with it!
ok mate ive done that ive also got a booster from argos the slx version with that nob ive turned it but nothing what if i go to that green box outside and open it up can i change anthing in there to make me get a better signal??
Bookmarks