-
Rawflash v3
cOz released Rawflash v3, which allows you to flash your NAND from Xell '2Stages' (RGH Xell):
Let's you flash full raw images (16 or 64MB) to your NAND. Started, as usual, via XeLL.
place "nandflash.bin" on the root of a usb device
start 2stage xell and shut off when prompted (replug power if you changed SMC)
- by default it checks blocks before writing, and will NOT overwrite or erase any block with ecc/other issues (perfect for fbbuild images with auto remaps)
small change to libxenon was required to silence non-error messages
tested on falcon, trinity and jasper 256
v3: re-re-refix bad block skipping so it skips it in both the dump and flash instead of just in the dump
v2: add big block support
v1: initial version
Code:
http://libxenon.org/index.php?topic=212.0
And before you ask its above my head at the mo diablo Hidden Content Will be looking into using it when we get hold of the coolrunner chips Hidden Content
Insanity is hereditary, you get it from your kids!
Be the change you want to see in the world
-
Post Thanks - 1 Thanks, 1 Likes
-
Re: Rawflash v3
Your ok this time tink,...........I don't even know what questions I could ask! Hidden Content Hidden Content
-
Post Thanks - 1 Thanks, 0 Likes
Bookmarks