PDA

View Full Version : pin protected movies question?



sprally
02-12-2006, 04:24 PM
i have a atmega 163 and i'm in a telepest area, i take it pin protected movies are a no no?

Duffy
02-12-2006, 04:31 PM
no. you can view pin protected movies, if your talkback is cut Cable co cant see what your doing.

kwon
04-12-2006, 06:01 PM
I have screen requesting a pin but I cannot how this can be as I have no pins set for any channels. This only applies to the porn channels. Any ideas as to how I enter a pin to reveal these channels.

Gavpo
04-12-2006, 09:45 PM
try 1234 if that doesnt work then yull need to reset the box and set it up again with libby (net id etc) then go into the engineers menu (hold down up/down buttons then plug it in) and pick a new pin..

sprally
04-12-2006, 11:24 PM
my talkback is cut, and when u used to get ppv the pin was1234, but when i press red button, nowt happens??

Gavpo
04-12-2006, 11:33 PM
if you using an atmega u might not get everything but give it a chance if you only just make your card....might take a while to update itself

neilf
05-12-2006, 09:41 PM
i got the same problem and mine has not been workin for somtime i heard about the down grade trick

sticky
05-12-2006, 10:58 PM
my talkback is cut, and when u used to get ppv the pin was1234, but when i press red button, nowt happens??
red wont work when tb cut

sticky
05-12-2006, 10:59 PM
no. you can view pin protected movies, if your talkback is cut Cable co cant see what your doing.
on some images i think

kwon
06-12-2006, 09:10 PM
I have now lost all sky movies. Anyone else have the same problem?

IAmATeaf
10-12-2006, 09:53 PM
excw here, get blue screen on tvx, press red button brings up the pin dialog, enter pin and channel clears. the only strange thing I've noticed is that once the channel is on you then can't use the normal ch up/down buttons, you have to press tv which then brings the blue screen and then ch up/down works.

neilf
10-12-2006, 10:34 PM
do you mean the on demand films these i lost about a year ago

farenheit
17-12-2006, 08:35 PM
You could try this: (worked for me on 1010p1b)

1] Replace tuner with one with talkback
2] Force update 4321
3] Change to channel 409 or 410.. and press red. If the above has been done right you will get:
"Updating settings, you will not be able to use your remote.. blah blah" after which the box will reboot.
4] Go to channel 409 or 410 again and press red.. You will get Loading Data... untill pressing red does nothing. This is ok.
5] Reboot again and force update once again 4321.
6] Again go to channel 409 or 410 and press red. It will do nothing again.
7] Replace tuner with talkbalk disabled and boot up box. Now you should be able to enter pin and watch movie provided it is enabled on your card.

BE WARNED THAT TALKBACK WILL BE ENABLED THROUGHOUT THIS PROCEDURE! USE AT YOUR OWN RISK!! I will not be held responsible, although it did work for me tho' lol

Good Luck.

Regards

FH

kwon
17-12-2006, 09:56 PM
Got all my sky channels back

gtisi
19-12-2006, 07:55 PM
This might be a really stupid question but I hope being the newbie area you can forgive me. When I see pin protected channels I press red and it brings up a dbox menu not a pin menu. LIkewise if I wanted BBCi by pressing red button, I cannot do it through Dbox, I have to use the freeview in my telly

domingo
21-12-2006, 01:56 PM
Hi, Guys my first post here how do a get to the red button if I don't have a remote control as yet.

Thanks

Domingo

Parva
22-12-2006, 04:49 AM
Hi, Guys my first post here how do a get to the red button if I don't have a remote control as yet.
Thanks
Domingo
Errrrm, simple answer. You can't!