PDA

View Full Version : help with cable cards



nitromax
22-11-2006, 11:13 PM
Hi all

i have 2 cable boxes and i am on telewest.
the guy i normall get the cards done, i can not get hold of him, and his phone is turned off.

and the kids are driving me carzy with no cable:(

i have one box which is a pace DITV phase 1000 1b which has a telewest communication card in it, it has a 6 digit code written on it in pen.

the second box is a Pace Di1010T Phase 1b which has a OPOS card in it.
it has a 6 digit code written on it in pen.

what equipment do i need to reprogram these cards,
and what software do i need as well

if it is possible can you please send me a link for the equipment.

i am a newbie and dumb and i think this has been asked a thousand time, but i have been looking at the other threads, and i do not have a clue what i am looking for.

many many many thanks in advance

regards

nitro

sticky
22-11-2006, 11:54 PM
nice first real post well send me your box and card(only one box and 1 card) and i will do it for ya no probs

nitromax
23-11-2006, 12:09 AM
nice first real post well send me your box and card(only one box and 1 card) and i will do it for ya no probs


thanks for that sticky fingers.

but need to know how to do it myself if i am going to get hit.

is it simple to do.

missy
23-11-2006, 02:14 AM
1st find tutorial on how to reprogram the card you want and all will be revieled step by step including all equipment needed.
im confident you will get there

sticky
23-11-2006, 09:47 AM
nitromax i was joking m8
and what missy said you cant go wrong

nitromax
23-11-2006, 04:34 PM
hi guy i found the tutorial, but which is the best card read and writter to get.

can you get one that plugs into the usb port or do they have to be serial.

can you send me link on the best hardware to use which is compaterable.

thanks

djdoddy00
23-11-2006, 06:40 PM
go for an infinity usb unlimited. These are widely regarded as the best all round programmer. To start you'll need your box key for each box and the ird. You will be able to get the box key from the opus card, but the telewest card will be damaged and you wont be able to get it from that 1. Use nagraedit to read the cards

t_t
23-11-2006, 06:48 PM
cant go wrong with an infinity usb phoenix, its a bit cheaper than the unlimited but does all you will need. For funcards it uses just usb, but to program mosc it has to be connected by usb and serial for phoenix mode.

If your mosc is dead then you may have to find out your bk. I think u can use a led simm for your box.

djdoddy00
23-11-2006, 09:02 PM
yes both these boxes (1010P1b and 1000p1b both take an LED simm)

sticky
23-11-2006, 09:44 PM
infinity usb phoenix works for me

telboy
23-11-2006, 10:12 PM
infinity usb phoenix works for me too . cracking little programmer

luckym71
24-11-2006, 06:08 AM
infinity unlimited is the best

nitromax
24-11-2006, 06:53 AM
thanks guys,

just order infinity unlimited usb, for ?40.

cant wait to get it and try and programming cards myself.

thanks very much for the help.