media
22-11-2006, 02:31 PM
Please can any one confirm if what i am doing is right to programme the fun card, it is a clanzer minisdk and v2.7 software.
1 Memory data(base code)=Flash for your area =hex file
2 internal eeprom data(base code)=crypthex.hex file
3 External eeprom data=box key and ird image hex file
Command setting=Blow bootloader+ext eeprom+base.
I have programmed it this way and all i get is card is not inserted.
Thanks in advance.:sad:
1 Memory data(base code)=Flash for your area =hex file
2 internal eeprom data(base code)=crypthex.hex file
3 External eeprom data=box key and ird image hex file
Command setting=Blow bootloader+ext eeprom+base.
I have programmed it this way and all i get is card is not inserted.
Thanks in advance.:sad: