PDA

View Full Version : Any Commando Image Feedback And Help Post here



cantona lives
28-05-2006, 08:30 PM
Gents just loaded Commando 3 . Had pacino image all ok. But thought i'd upgrade. However after putting c3 on. Cannot get time and channel no available. Have slow scanned using 6952 picked up 352 channels but no look ucode 001a have changed to 0014 but no luck put back to 001a . Any ideas
Many thanks in anticipation.

Hunter
28-05-2006, 08:45 PM
hi there
just a quickie
ftp into the box and remove the myservices file
i use ucode 0014
and also go to
dbox
settings
mics
and turn off spts mode

hope this helps

have fun

scruff1963
28-05-2006, 08:49 PM
to be honest changing the ucode should have sorted it, that is the cause of waiting for time 99% of the time.
are there any other ucodes to try in Commando ?

Hunter
28-05-2006, 08:50 PM
if you require any help with any of the commando images please feel free to post your remarks or questions in here and either i or another team-member will get back to you as soon as we can

cheers guys

cantona lives
28-05-2006, 08:59 PM
you guys are the best. new name from previous but had nothing but fantastic help from you boys. i love you all8-}

Hunter
28-05-2006, 09:01 PM
well were here to stay lol
:"v

timcfc
01-06-2006, 07:00 PM
well i tried using commando and i didnt get very far with it.
when i scanned i got roughly 80 channels most of them freeview.
i have followed instructions and i still became stuck,i wrote in the correct frequency and net ids,so if any of you have any suggestions?
also would i be better at trying the commando jedi image as im sorta new at this?
would commando jedi just pick up the same channels as commando v_3
and 1 last thing,is there any chance i can get sky BO or FR when using commando jedi?

thanks in advance!

renwich
01-06-2006, 08:32 PM
Jedi has a simpler method of setting up scanning, if you dont use any games or plugins its the image for you

timcfc
01-06-2006, 09:41 PM
thanks for the reply!
however will commando jedi allow me to watch sky BO or FR?
also how many channels roughly should i be pickin up with commando jedi?
thanks again!

Hunter
01-06-2006, 09:44 PM
i pick up about 270 channels if that helps

timcfc
01-06-2006, 10:13 PM
sky bo or FR as well hunter007?

Hunter
01-06-2006, 10:16 PM
depends if your area has gone to VOD or not

budmonster
04-06-2006, 03:29 PM
just flashed me box with comando v3 just wondered what the original ip is
for the image
tried 192.168.150.5/6 didnt pick it up the remote in the dbox is busted so i only can control it over a network


:please:

cheers

Hunter
04-06-2006, 03:37 PM
192.168.0.24 perhaps
renwich usually has the last look before releases of any commando images so he might know

and no doubt will reply to this thread ;)
and welcome aboard mate

budmonster
04-06-2006, 04:48 PM
192.168.0.24 perhaps
renwich usually has the last look before releases of any commando images so he might know

and no doubt will reply to this thread ;)
and welcome aboard mate

thanks mate no good though

Hunter
04-06-2006, 04:50 PM
whats no good lol?

budmonster
04-06-2006, 04:53 PM
whats no good lol?


sorry mate cant get on the box with that ip

Hunter
04-06-2006, 04:55 PM
:9: your gonna need to buy a remote eventualy

budmonster
04-06-2006, 05:03 PM
:9: your gonna need to buy a remote eventualy


its not the remote mate its the box i have a working remote but the box doesnt get the signal must be the reciever on the box opened it up couldnt see anything obvious box works fine apart from that
(and of course i dont know the ip now)

Hunter
04-06-2006, 05:19 PM
if its a sagem i might have IR piece spare

budmonster
04-06-2006, 05:23 PM
if its a sagem i might have IR piece spare


thanks again mate its a nokia 2X had 2 boxs myself let me mate have one then the remote packed up on mine

ill pop round his tonight flash his box get the ip then put his image back on should sort my problems out

thanks for the help

budmonster
04-06-2006, 06:15 PM
just for reference the images default ip is 192.168.1.100

Hunter
04-06-2006, 06:18 PM
cheers bud=Dv
hope you got it sorted

Daverino
05-06-2006, 06:35 PM
Hi, can i change ucode with remote control?

Daverino
05-06-2006, 06:59 PM
Hi hunter007 I have tried changing stps mode but no luck,still only receiving bbc 1,2,3 & 4. Can I change my ucode with my remote it is on 001a at the mo'.

Daverino
05-06-2006, 07:01 PM
Hi there, I have tried changing stps mode but no luck,still only receiving bbc 1,2,3 & 4. Can I change my ucode with my remote it is on 001a at the mo?

renwich
05-06-2006, 07:02 PM
Yes, blue button commando menu > system menu , ucode options are there m8

Daverino
05-06-2006, 07:08 PM
Hello renwich,
ucode is now on 0014 but no change
any ideas m8?

renwich
05-06-2006, 07:10 PM
so u can only get fta channels..?? if so has anyone used the panic button..??

Daverino
05-06-2006, 07:13 PM
Yes, my son did.

renwich
05-06-2006, 07:14 PM
reflash then m8 ..! its the only way m8

Daverino
05-06-2006, 07:15 PM
How do I do that? Sorry I'm a newbie!

renwich
05-06-2006, 07:17 PM
can you ftp to the box..?

Daverino
05-06-2006, 07:19 PM
Does that mean link to my PC?

renwich
05-06-2006, 07:23 PM
is your dbox network connected to your pc ..?

Daverino
05-06-2006, 07:27 PM
No, my friend set it up with his laptop, all working fine, then my son pressed panic button. Do I just connect to ethernet socket?

renwich
05-06-2006, 07:28 PM
you will need a crossover cable, if you dont have a router or switch\hub

Daverino
05-06-2006, 07:29 PM
Is this a splitter or is that different because i've got a splitter.

renwich
05-06-2006, 07:45 PM
I've got a tutorial somewhere, cant lay my hands on it at the mo, but to be honest I'd get your m8 to reflash it for you

Daverino
05-06-2006, 07:49 PM
Ah, I did, this afternoon but alas no change.

renwich
05-06-2006, 07:55 PM
If your m8 reflashed it, and put your service files back on then you should get the channels,as before, unless the panic button has been pressed again, get your m8 to flash the newest sportster from the download section onto your box

Daverino
05-06-2006, 08:17 PM
Is a crossover cable the same as a splitter?
Where could I get one if not the same?
How much would one cost?
And thanks very much for your help.

renwich
05-06-2006, 08:20 PM
A crossover cable is not the same as a splitter m8

PC World - BELKIN A3X126-10 CAT 5UTP CROSSOVER CABLE - Shop for cheap PC Cables (To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. 5@@@@&BV_EngineID=ccedaddhmgdddghcflgceggdhhmdgmj.0&page=Product&fm=null&sm=null&tm=null&sku=116236&category_oid=)

this is what you need, I'm sure u can get them a lot cheaper

Daverino
05-06-2006, 08:35 PM
Thanks a lot m8, I think I'll get one of these and DIY it. You're a star!!

renwich
05-06-2006, 08:36 PM
np m8 I'll find the tutorial I have and post it for you

cantona lives
06-06-2006, 08:50 PM
Gents i know i kicked this off. But after hunter sent me his image i still had probs , what id after that was load my Boquets and services xml in and all then ok. Dont know if this is relevent

renwich
06-06-2006, 08:55 PM
glad you got it sorted m8

hellrazor
09-06-2006, 11:42 AM
hi guys, i have just put a jedi image on my sagem with no probs.
unfort i can not communicate with box now.
i have transfered service files from pc to box with sportster images b4 with no probs and vice versa.
with the jedi image i get to the password screen etc,i put in root and dbox and then i get a blank screen where there should be all your folders etc etc.i cant get in to the tmp directory either.i have rebooted box and tried again but with no joy.
pc and box correctly set up on a network etc
any ideas if i am missing a setting on jedi image ??
any help appreciated
regards

nufc4life
09-06-2006, 12:37 PM
i have installed commando on my dbox2 and cant seem 2 connect to the box i have changed the ip address but nothing happens can anyone help me please

fergalsworld
09-06-2006, 12:54 PM
Turn off all antivirus,firewalls and popup stoppers
give your pc a static ip of
pc=192.168.1.201
subnetmask=255.255.255.0
set to 10baseT_halfduplex
dbox
ip=192.168.1.202
subnetmask=255.255.255.0
hi lite start/restart network now press ok it will flicker once then save settings
on your pc open a command prompt and type in
ping 192.168.1.202 and press enter
see if it replys if it does away you go.

nufc4life
09-06-2006, 01:46 PM
i have tried that m8 but it still dosent work do u have any more things i can try plz thanx

Hunter
09-06-2006, 01:53 PM
if your near the darlington area mate i,ll do it for ya ;)

nufc4life
09-06-2006, 02:03 PM
i live in newcastle m8, I have sucsessfully flashed 2 images 2 my dbox but i have the commando image on now and cant connect 2 my box, i have tried everything but the null modem cable can someone tell me how much are the cables 2 buy please thanx

nufc4life
09-06-2006, 02:59 PM
I have sucsessfully flashed 2 images 2 my dbox but i have the commando image on now and cant connect 2 my box, and only receve freeview channels, i have tried everything chganged the ip addresses but havent tried the null modem cable can someone tell me how much they are 2 buy please thanx

notanotherone
09-06-2006, 03:45 PM
a null modem cable can be purchased from fleabay for £2.99 plus £1.99 p+p or from maplins for about £6.99

PnP
11-06-2006, 01:27 PM
Hey lads.

Just installed commando 3 after using sportster ultra. Had a few problems with getting no channels.

I found the error to be the 'myservices' file. Deleted and found channels.

But some Channels don't get sound. When i change from the channel and back again i get sound for 2 secs and then i only get picture.

I'm using ucode 0014

Any ideas?

Hunter
11-06-2006, 02:33 PM
Hey lads.
Just installed commando 3 after using sportster ultra. Had a few problems with getting no channels.
I found the error to be the 'myservices' file. Deleted and found channels.
But some Channels don't get sound. When i change from the channel and back again i get sound for 2 secs and then i only get picture.
I'm using ucode 0014
Any ideas?

look under dbox, settings, misc and turn off spts mode ;)
:fence:

Hoagy
11-06-2006, 03:19 PM
look under dbox, settings, misc and turn off spts mode ;)
:fence:

and if that dont work check that dolby digital is switched off in the audio settings.
people use to have problems with sound on some disney channels when it was switched on.

PnP
11-06-2006, 09:01 PM
Thanks for the help, much appreciated.

Hunter
11-06-2006, 09:32 PM
Thanks for the help, much appreciated.
now you can try commando 4 lol ;)

PnP
11-06-2006, 10:18 PM
Commando 4 all installed and service scan in progress.

Hunter
11-06-2006, 10:24 PM
cheers pnp

renwich
11-06-2006, 11:13 PM
nice onnnne m8

squidge
13-06-2006, 04:51 PM
hi would apreciate any help with this i have just got a nokia dbox with commando v3 installed on it and when i try to scan all i get is transponder scan failed if anyone could point me in the right direction i would be well happy

digitalman
13-06-2006, 05:52 PM
hi would apreciate any help with this i have just got a nokia dbox with commando v3 installed on it and when i try to scan all i get is transponder scan failed if anyone could point me in the right direction i would be well happy


which cable provider you using when doing the scan 6952 or 6887?
and what provider do you have is it tw or n*l?

jay
13-06-2006, 06:05 PM
Try another image mate, whats your background? have you flash a dbox before?

squidge
13-06-2006, 07:09 PM
nt* tried scanning with both 6887 and 6952 thankyou

fergalsworld
13-06-2006, 08:16 PM
Have set the frequency,net id and symbol rate in the scan menu for your area.
fastscan on
save settings then reboot check they have saved then do a scan.

squidge
13-06-2006, 09:46 PM
these are the settings in the scan conf i used


TP_fec=3
TP_freq=******
TP_pol=0
TP_rate=****
TP_scan=0
bouquetMode=0
delivery_system=0
diseqcMode=0
diseqcRepeat=0
netid=00005
satCount=0
satNameNoDiseqc=CableUK Sym6***
scanSectionsd=0
scanType=1
scan_mode=0

much apreciate the help thanks as i want to avoid flashing

squidge
13-06-2006, 09:47 PM
changed to this with flashfxp still no joy sigh u ever get that sinking feeling

TP_fec=3
TP_freq=666750
TP_pol=0
TP_rate=6952
TP_scan=0
bouquetMode=0
delivery_system=0
diseqcMode=0
diseqcRepeat=0
netid=41053
satCount=0
satNameNoDiseqc=CableUK Sym6887
scanSectionsd=0
scanType=1
scan_mode=1

thanks for youre help guys

renwich
14-06-2006, 08:43 PM
hi would apreciate any help with this i have just got a nokia dbox with commando v3 installed on it and when i try to scan all i get is transponder scan failed if anyone could point me in the right direction i would be well happy


sounds like the /var/tuxbox/config/scan.conf maybe corrupt

try overwriting yours with this one from the downloads section

dont forget to setup your fast scan settings again then REBOOT..!

http://world-of-digital.com/forums/tools-utils/1325-scan-conf.html#post6614

squidge
14-06-2006, 09:37 PM
thanks mate will do ps is it ok to go into scan conf with flash ftp and edit/save cheers as i havnt got a decent guide for the setup cheers

renwich
14-06-2006, 09:43 PM
thanks mate will do ps is it ok to go into scan conf with flash ftp and edit/save cheers as i havnt got a decent guide for the setup cheers


it Is commando 3, you r running ? goto the commando menu select scan setup
enter your net-id details then reboot m8 no need to manually edit the file,,

squidge
14-06-2006, 10:43 PM
running commando 3 put in youre scan conf and put in net id details in commando still no transponder gutted cheers for the help though

squidge
15-06-2006, 12:45 AM
am worried tuner is nackered
but am a newbie and liable to flap think i have signal
ber 104758
snr 43947
sig 39835

but is same with or without cable in????

thanks guys helpis apreciated think i dont know what am doing now LOL

scruff1963
15-06-2006, 02:09 AM
changed to this with flashfxp still no joy sigh u ever get that sinking feeling

<snip>
TP_rate=6952
<snip>
satNameNoDiseqc=CableUK Sym6887
<snip>
thanks for youre help guys

That cannot be correct
you can't mix 6952 and 6887 it is either one or the other ????

Try either
TP_rate=6887
and
satNameNoDiseqc=CableUK Sym6887

or
TP_rate=6952
and
satNameNoDiseqc=CableUK Sym6952


Sounds more like
TP_rate=6887
and
satNameNoDiseqc=CableUK Sym6887


Have you tried a slow scan ?

.

squidge
15-06-2006, 12:21 PM
thanks for getiing back to me as have been pulling my hair out will have another look thankyou

squidge
15-06-2006, 12:25 PM
this is my scan conf after following renwitches advice looks ok to me but am newbie thanks also have tried scanning with fast scan on and off cheers


TP_freq=******
TP_pol=0
TP_rate=6***
TP_scan=0
bouquetMode=3
delivery_system=0
diseqcMode=0
diseqcRepeat=0
netid=41053
satCount=0
satNameNoDiseqc=CableUK Sym6***
scanSectionsd=0
scanType=3
scan_mode=0

renwich
15-06-2006, 05:00 PM
TP_fec=3
TP_freq=******
TP_pol=0
TP_rate=6***
TP_scan=0
bouquetMode=2
delivery_system=0
diseqcMode=0
diseqcRepeat=0
netid=******
satCount=0
satNameNoDiseqc=CableUK Sym6***
scanSectionsd=1
scanType=3
scan_mode=1


Heres wot mine looks like m8

alanbk
15-06-2006, 08:11 PM
Bit confused here Renwich. Are you using wildcards for the Net ID, Frequency etc. or are you using the asteresk to hide the settings? if it is wildcards, I presume the scan will cover all freq. Net IDs etc. Thanks in advance.

bladesftp
15-06-2006, 08:14 PM
hes using them to hide his own setting m8

renwich
16-06-2006, 12:10 AM
Bit confused here Renwich. Are you using wildcards for the Net ID, Frequency etc. or are you using the asteresk to hide the settings? if it is wildcards, I presume the scan will cover all freq. Net IDs etc. Thanks in advance.


sorry m8 my bad

I'm was using the *'s to mask my location m8

squidge
16-06-2006, 01:22 AM
got my box working i played around with the settings and disabled http server and scan worked fine first time could this be a memory issue cos it seems odd and also some channels keep stuttering could this be a signal issue if so would a signal booster be a good idea thanks for all your help cos if i had been on my own all i would have had was a heavier bin bag to take out thanks again everyone ps have ** my settings cos i **** myself after thought

fergalsworld
16-06-2006, 01:30 AM
press red then blue button on a working channel
post the ber,snr and sig readings approx will do
do the same for a freezing channel.
the ** could be thousands lol dont worry.

chrisgill244
16-06-2006, 01:00 PM
Hi guys I'v got a sagem dbox II I have just loaded commando 4 everything was going fine but when I tried to edit the bouquetts using yweb it won't save.

Hunter
16-06-2006, 01:05 PM
Hi guys I'v got a sagem dbox II I have just loaded commando 4 everything was going fine but when I tried to edit the bouquetts using yweb it won't save.
this used to do it on a box i had
i dont think it,s down to the image as it now works on mine and i was thinking it might have had to do with the way my network was set up

i bet your doing it over wireless??
hardwire worked for me
:)v-

chrisgill244
16-06-2006, 01:12 PM
I'm using a crossover cable, I can access the dbox to see all the channels just can't save.

renwich
16-06-2006, 02:50 PM
post nagging wont get you far m8..!! try the download section maybe..???

squidge
16-06-2006, 08:47 PM
hi guys got the slx signal booster from argos that was recomended on another thread and channels work fine has adjustable gain so can see it was def that and put a spliter in so have net and dbox at same time now LOL and thanks for replies

ps is memoy an issue? if so could someone point me in the right direction to see what i have to play with thanks again

fergalsworld
16-06-2006, 09:33 PM
ps is memoy an issue? if so could someone point me in the right direction to see what i have to play with thanks again
There is only 32mb of memory not a lot is left free
dont know the exact figure maybe ren or hunter know the answer to this.

squidge
19-06-2006, 03:10 AM
hi everyone got there in the end my scan conf was corupt ignore nonsens about http settings just needed reboot at mains LOL (more bothered about getting it working than thinking about what im doing)
put in some services and all working fine can select the right scans now sos to be an arse but am just finding my feet

fergalsworld
19-06-2006, 03:31 AM
Glad you sorted it m8.
now see what she can really do.

fergalsworld
20-06-2006, 04:20 PM
not that great an image - didnt work well with my sagem 1x box mibz works better on nokia 2x
Hmmm not that great an image eh m8
just cos it did'nt work well with your sagem does not mean the image is no good did you try and change the settings so it was set up for a sagem.

or were you to busy getting your post count up to 10 to get into the downloads section and then found out you needed a password to access it
then promptly went offline:mad:

renwich
20-06-2006, 05:16 PM
not that great an image - didnt work well with my sagem 1x box mibz works better on nokia 2x


cheers, cant please everyone but at least you tried it "not a great image" was a bit blunt like

Hunter
20-06-2006, 05:19 PM
were can i get commando4
ten descent post and a password from a mod would work

nash
20-06-2006, 07:20 PM
if your near the darlington area mate i,ll do it for ya ;)

i'm in that area hunter would be gratefull if you could send that proggiemy way sorry cant remember what it is called....lol

Hunter
20-06-2006, 07:28 PM
check your pm,s mate i got just the fix ;)

gav12345
03-07-2006, 06:43 AM
great image guys btw love it

keep up the hard work

chewinmafat
27-07-2006, 08:40 PM
Have D-Box, working great though now the latest image i have (DL May) seems to be given audio problems, as slight delay in the speech, like dodgy subtitled film, any help would be appreciated

ireland-batt
27-07-2006, 09:07 PM
ive set up commando on 3 boxes now with out any problems
all running fine in diff areas of belfast with no problems
just flashed the boxes
nokia like ucode 14 1 box
sagem liked ucode 01 2 box
spts off on all boxes
updates with out messages
dont read epg
did not plug in to cable feed yet next thing
you dont have to scan if your bouquets are set up correct

used Bouquet Wizard to sort out all the dead channels and crap exported to my desktop
the ftp/d to box just services and bouquets nothing else named them belfast
plugged in to cable feed and not a problem updating epg all channels found did not scan or any thing or set up sym etc
andre is scanning away for new channels but my bouquets remain unchanged and never lose any channels

chewinmafat
29-07-2006, 08:41 PM
sorry, but does that me i need a new image?

renwich
29-07-2006, 08:50 PM
Have D-Box, working great though now the latest image i have (DL May) seems to be given audio problems, as slight delay in the speech, like dodgy subtitled film, any help would be appreciated

you've not stated which image u downloded m8



sorry, but does that me i need a new image?

only if you feel like a change , if your current image works y change it

if your confident you have a good working backup, of your current working image

backup your services and boquete files seperatly

give it a go

chewinmafat
29-07-2006, 10:14 PM
ehhh... I have'nt a clue, downloaded it for the lanarkshire area in May, sorry, afraid am still green with this matter