PDA

View Full Version : XBOX 360 Xtreme firmware 3.2 for Toshiba Samsung TS-H943



SpaceDog
04-09-2006, 10:14 PM
------------------------------------------------------
Xtreme firmware 3.2 for TS-H943 Xbox 360
------------------------------------------------------

If this at all violates any site policy, then please feel free to delete this thread, and accept my apologies, just thought it might help a few people. A download link is in the attached txt file.

mafiasilk
05-09-2006, 09:24 AM
I flashed using the original Xtreme firmware, can this be flashed over the top over the this one?

SpaceDog
05-09-2006, 11:30 AM
Yes, that would be fine.

a1079548
30-09-2006, 07:48 PM
What's new in the 3.2 release? I have he original and it works great. Would it be worth re-flashing?

nash
14-10-2006, 10:42 PM
Version 3.3 is out now with the firmware do you still need to have it modded.
sorry i know nothing about things just have a few things that need modding :(

Broka
15-10-2006, 12:51 AM
4.0 just got released today:


Xtreme firmware 4.0A and 4.0B for TS-H943 Xbox 360
World first FirmGuard, Dual Speed, Media Stealth, One Firmware, Xbox 360 backup and extraction firmware modification!

What's new/fixed (since v3.3)
* MS28 core firmware. Also better and faster media detection.
* FirmGuard added. On by default. Firmware cannot be Read/Written by 360 console. Can ONLY be turned off (Read/Write enabled) via Enable0800 mode.
* 4.0A firmware. 4.0A is default Fast Read Speed mode. Quite/Slow Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.
* 4.0B firmware. 4.0B is default Quiet/Slow Read Speed mode. Fast Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.

Some details about new features:
* For Xtreme 4.0A default backup Read Speed is same as original game disks 12x. When Original Game disk is booted, all subsequent backup loading will be at Quiet/Slow Read mode, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed (12x). Quiet/Slow Read Speed is for quiet operation and/or cheap DVD+R DL media.
* For Xtreme 4.0B default backup Read Speed is Quiet/Slow 2-4x. When Original Game disk is booted, all subsequent backup loading will be at Fast Read mode 12x, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed for backups (2-4x).
* FirmGuard disables reading/writing of drive firmware. This is always on. Can only be turned off via Enable0800 mode. Do not have SATA cable plugged into Xbox 360 console when in Enable0800 mode.

plexo
15-10-2006, 03:51 AM
get it from here

thisisalinky:wastedknights.co.uk/xtreme/

any problems go to #fw@efnet

nobron
23-10-2006, 11:18 PM
hi all

thinking of flashing mine, have not had it open yet so dont know what firmware to use yet.

but just want to know if when i find out first, i flash my 360 and it does not work can i get it back to the original state and if so do i have to save the original firmware before i proceed to flash?

pfitz
26-10-2006, 12:01 AM
yes you can save your original firmware first, and keep it in a safe place incase anything should go wrong

jacksnap
28-10-2006, 03:51 PM
man, i want to do this but i only have a SIL 3112 sata interface, and from what i read it wont work with this, I dont want to try it in case I brik the drive.:sad:

violentj
06-11-2006, 10:34 AM
up to date one