PDA

View Full Version : 250 wont boot



tiptop
30-08-2006, 12:07 PM
having probs with modem done wot it said in tut and only the power light and ethernet light up can someone tell me were i have gone wrong thanks tiptop

aslam
30-08-2006, 01:22 PM
they do that as it not the legitimate firmware. your mac is probaly not working.

tiptop
30-08-2006, 02:02 PM
so why dont it boot on line then
they do that as it not the legitimate firmware. your mac is probaly not working.

aslam
31-08-2006, 09:39 AM
your mac is probaly not working. i maybe becuase someone in your gateway is using the mac. also sometime it can take a good two minute to authenticae.

anyway make sure you have set you ip to search automatically in network ocnnections and then reset. if your note sure if you have done everything write try using the 250 one click auto hacker. this will do evrything for you.

ill be posting that today after i get rid of a few little bugs.

tiptop
31-08-2006, 02:11 PM
thanks for your help m8 got it all going
your mac is probaly not working. i maybe becuase someone in your gateway is using the mac. also sometime it can take a good two minute to authenticae.
anyway make sure you have set you ip to search automatically in network ocnnections and then reset. if your note sure if you have done everything write try using the 250 one click auto hacker. this will do evrything for you.
ill be posting that today after i get rid of a few little bugs.

crossygod
04-01-2007, 12:02 AM
hi mines doing the same what did u do to fix it thanks

d3putydawg
04-01-2007, 09:16 AM
have you looked for a mac address if so u can not use the mac address in same area get a friend from another part of town to look for some for you

leedslads
05-01-2007, 02:05 AM
can sume one plz tell me how a chance my mac address and if u can get a old ntl 250 box back on when ntl hav turn it off

bulldog36
12-01-2007, 05:30 PM
mine is doing the same just the 2 lights i went up my m8s in a diff area and run dhcp force so i know the mac addys are ok im in tw area not ntl and i write cfg cm-10240-384 but it never finds my cfg any ideas where im going wrong plus the tut says usb mac addy does this mean ive goto use a usb or can i still use ethernet if it is usb anybody got the drivers.

aslam
13-01-2007, 11:45 AM
how far away is your friend? it needs ot be a couple of miles as he may be on the same gateway!!!!!

the two lights thingy as mentioned before as not the official firmware will not use all the lights.

The ethernet is the best thing to use and if you want to use usb then you need to set the modem with the usb mac.

bulldog36
13-01-2007, 12:03 PM
he is more than 2 miles and i know they work as i have the 4100 and 4200 with those mac addys in.as for setting with usb i followed the tut and it only tells me how to set usb mac thats why i was wondering if thats whats wrong if so what is the code for normal mac i tryed mac_address 1 but it sayd wrong

aslam
14-01-2007, 01:11 AM
when your doing the bit


write_memory -s 4 0x807e8b98 0xxxxxxxxxx
write_memory -s 2 0x807e8b9c 0xxxxxx

are you chaning it to your mac address?

or has the 250 changed since the last time it was done?

there is a mac changer avialable by search and that will change the mac for you if you dont want to start from fresh


try that and let me know

bulldog36
14-01-2007, 11:56 AM
no the mac addy changes to the one i have so the mac addy is right then i enter cfg which in my area is cm-10240-384
i then force it to use cfg
but still only get the 2 lights
as i said before the only thing im not sure about is on the tut you enter a usb cmd so does this mean it has to go threw usb if so what is the cmb for just a normal mac.
forgot to say no cfg appears either i never see my cm-10240-384