PDA

View Full Version : A guide to updating your jtag to dash 16747



alanjg007
24-05-2014, 09:51 AM
how To:


Download this first - update files (130mb) (To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Install/Update your dashlaunch to v3.12 - do this by moving the "Installer" folder to your choice drive and running the default.xex and update as it prompts.



reboot console and launch the program again.



Open the options section "Configurator" and scroll down to "updserv" and enable it, this is all we need to do on the console. ..Leave dashlaunch running right there (don't save config)


Now we move to the PC and extract the file pack from the download in downl, open the folder and find the file "UpdateMyConsole.bat" and click it, your updater will open , and less than a minute later your update will be done and flashed!,, including avatars!! :D

(if console connection fails try the "UpdateMyConsole_ForceIP.bat" file)

You might have to edit an IP that's about it :p

Huge thanks to XeBuild team , and JPizzle for his original tutorial on this,

alanjg007
21-06-2014, 02:34 PM
Download and extract the files from here:


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Than extract the contents of the files attached to this post thyen paste into the folder you created above. It should prompt you saying your overwriting files, just accept it as thats what we want to do.

nicke20
14-11-2014, 03:09 PM
All i did was flash the nand using xe build and leave dashlaunch as it was and i rewrote the ini file and dropped it in the root, hey presto, latest dash and fsd still working