PDA

View Full Version : Blade 7000.



shaft56
26-09-2013, 04:08 PM
I'm new to the blade box flashed it with the latest firmware box is picking up all the channels but can only watch fta TV. Checked and double checked what i'm I doing wrong? I have just read I need a sealion;) what do I do next?

shaft56

billy149uk
27-09-2013, 09:39 AM
You need to find someone who can supply a csealion;) to you.They usually charge an annual fee for this.I pay ?120/year for this privilege which should get you all channels.Make sure you have the correct firmware in your blade by using your remote and pressing 9991 and see if you can access the secret menu.If you can't access it then you have the wrong firmware installed,make sure firmware says "patched".As for someone to supply a clion;),ask around locally and try to find someone you can check out with other customers they have.

shaft56
27-09-2013, 02:25 PM
Cheers bill145uk got the patched firmware loaded and got the secret menu. I will try and find a local cc cam provider.

shaft56.

shaft56
30-09-2013, 06:37 PM
My head is buckled with all the ccam providers i'm from Glasgow area can anybody recommend me somebody?

shaft56

Magnu420
30-09-2013, 10:16 PM
My head is buckled with all the ccam providers i'm from Glasgow area can anybody recommend me somebody?

shaft56

no talk about them on wod

wullboy
01-10-2013, 07:47 AM
My head is buckled with all the ccam providers i'm from Glasgow area can anybody recommend me somebody?

shaft56

sorry m8, but google is your friend, nobody is allowed to put service providers on the forum, and your not allowed to talk about cardsharing, there is plenty out there, and there not ALL from the UK :wink:

shaft56
01-10-2013, 06:41 PM
Sorry i broke the rules.

shaft56

shaft56
03-10-2013, 07:49 PM
Hi I got a test line put it in manually and it won't connect tried & tried again no joy any ideas?

shaft56

berley
03-10-2013, 08:31 PM
what folder did you put it in ?

fergalsworld
03-10-2013, 08:48 PM
what folder did you put it in ?
It doesn't go in a folder as its a completely different setup on a blade :wink:
@shaft are you sure you put them in correctly, you would be better putting them in a csinfo file in slot 0 and load it from the usb

shaft56
03-10-2013, 09:09 PM
I copied the cclin into the 9991 menu and when i turned it on nothing happened .I also copied the cline onto my note pad do you include the N: before the line and do you have to rename it?

Got the template will give it a go fingers crossed.

shaft56

fergalsworld
03-10-2013, 09:17 PM
I copied the cclin into the 9991 menu and when i turned it on nothing happened .I also copied the cline onto my note pad do you include the N: before the line and do you have to rename it?

shaft56
Check the file i attached to my previous post, put your details in slot 0 then put it on a usb and load it through the menu's

billy149uk
03-10-2013, 09:21 PM
If your stuck use fergalsworld suggestion.Open text file Fergal supplied with notebook on PC and replace info with the info that was supplied.Put on memory stick and plug into back of blade.Press menu on blade and go 3 to the right then down to download.Press ok then select file on screen and press ok.Job done.If it's still not working on any channel put in code for secret menu and make sure it says connected if not press the red button to connect.Remember test line is time sensitive.If not working get in touch with them and make sure it's still on.

shaft56
03-10-2013, 09:50 PM
Cheers guys will give it a go will let you know. Thanks again.

shaft56


No Good tried what you said the box still says disconnected.????

fergalsworld
04-10-2013, 12:52 PM
No Good tried what you said the box still says disconnected.????
You do have the box connected to your router via a ethernet cable?
if you pm me the details (dont post it here) slot 0 from the cs info file i will check it for you

fergalsworld
10-10-2013, 10:32 PM
@shaft did you manage to sort it?

shaft56
11-10-2013, 09:52 AM
Hi Fergalsworld

I got a new test line and it connected ok.

fergalsworld
11-10-2013, 09:58 AM
Hi Fergalsworld

I got a new test line and it connected ok.
Niceone happy viewing :wink:

shaft56
11-10-2013, 10:47 AM
Thanks i appreciate everyone's help.

Maybe this will help other members when I got my test line and when I put it in connection_0 it wouldn't connect then I tried connection_1 and it connected instantly.


shaft56

shaft56
18-10-2013, 06:56 PM
Hi Guy's

Can this box take an internal hard drive? i don't want to open as it is security sealed.

Shaft56

fergalsworld
18-10-2013, 07:35 PM
Hi Guy's

Can this box take an internal hard drive? i don't want to open as it is security sealed.

Shaft56
No you can only use a usb external HDD with it

billy149uk
18-10-2013, 10:44 PM
Don't think so,I've got a 2TB external drive connected via rear usb.Loads of space if you want to keep movies,football etc.

shaft56
20-10-2013, 08:14 PM
Cheers will have a look. I'm looking to buy another box for my sons house is there any you would recommend?

shaft56

shaft56
20-12-2013, 12:28 PM
Hi my friends blade the small red standby light flashes all the time even when the box is switched on I have checked all the setting everything ok any ideas what could be causing this. Other than that the box works fine.

shaft56

billy149uk
20-12-2013, 01:48 PM
You need to use a external hdd.You can buy a 3.5" 1Tb ex hdd free post for ?50.
http://m.ebuyer.com/288343
Or shop around if you think that's to big.

shaft56
20-12-2013, 03:07 PM
Hi Billy my friends blade the small red standby light flashes all the time even when the box is switched on I have checked all the setting everything ok any ideas what could be causing this. Other than that the box works fine.

shaft56

billy149uk
20-12-2013, 03:29 PM
No,you can only use an external hdd.2 1/2" or 3 1/2".You can for example buy a 1TB (3 1/2") for ?50 free post,
http://m.ebuyer.com/288343
just depends on the amount of stuff you want to record.You can also put music and video files on your ex hdd and play them thro the Blade via the menus.Hope this helps.

billy149uk
20-12-2013, 03:50 PM
Not heard of that before mate.I don't know if this will help,it resets your box and then you need to reinstall firmware.
http://sataid.net/forum/showthread.php/25434-BM7000-Bootup-Error-Fix-only-a-flashing-red-dot-is-on-front-panel-visual-tutorial
MAKE SURE YOU SAVE YOUR CLINE OR NEWCAMB FILE TO A MEMORY STICK BEFORE YOU START.
Menu-Utilities-Download,you can then save key(c-line etc),save stb(firmware)and or save ndf(Chanel list) before you reset box.

master
01-01-2014, 11:05 PM
Excellent thread for someone new to this box. I understand I need a providers details for the cline (key) for an annual cost. Does this mean the provider will send me this file yearly as long as they receive the fee which I will have to upload to box.

billy149uk
02-01-2014, 02:15 AM
You will be required to pay an annual fee up front for the c-line.Try and make sure you get a reliable supplier through a mate or someone you know as it can be very costly.Get them to send you a 24 hour test c-line or newcamd which you add to a csinfo available in downloads(Blade) section.Put on usb stick,plug into back of box,press menu on remote > utilities v download.Box will read stick,highlight csinfo file and it will write it to box(provided you have the patched firmware).Givin time to connect to your supplier it should work.If your happy to go ahead you need to contact them and sort out a fee.

master
05-01-2014, 08:42 PM
Thanks for the info Billy. I think its all sunk in. Can you just clarify if I need to purchase this cline info to update every year of course assuming it is a reliable supplier and it lasts a year.

billy149uk
05-01-2014, 09:38 PM
The cline you buy at the very start will do you every year provided you stay with the same supplier and pay him every year when it's due.Otherwise your supply will stop.