PDA

View Full Version : Set Net ID Via Fun Card



Treb
12-08-2006, 07:01 PM
Ok peeps seems to be haveing a few problems this week first with the T911 now with the NEt ID, I have read the tuts about setting the ID via fun however weh it came to the external part on the tut I don`t know what this means can anyone help! :please:
below is the exact text from the tut
THE EXTERNAL EEPROM IS A NAGRAEDIT IMAGE. THIS MUST CONTAIN THE CORRECT
BOXKEY AND TIER01 MUST BE THE FIRST TIER ON THE CARD.
where do I get an imige and then edit the BK for to mine.

Any help at all!

thesparky
12-08-2006, 07:11 PM
which box do you have m8 its a good start

Treb
12-08-2006, 07:37 PM
Hi m8
its a sammy 2100c

Treb
12-08-2006, 08:32 PM
Hi thanks for replies, here is what I am doing,I am sticking thes into a program called [NetID] V2 Final
Net ID 41060 password 1234
save as MyInt
next
BK ffffffffffffffff (not real BK or ird of course)
ird 12345678
Save as myFlash
External
using same as myint

Programming Fun MyInt in Internal, MyFlash in Flash and myInt in External,
write card
next put sammy into engineers menu
then inserting card, and thats when nothing happens no rebooting it just sits there

what am I doing wrong?
(:|

Treb
12-08-2006, 09:46 PM
Thanks For all your help guys I finally managed to do it

dazzle46
15-08-2006, 09:32 PM
tried this method but didnt work for me

bammy
15-08-2006, 10:04 PM
You need to make sure the flash & int eep files have .hex extensions and the ext eep files has a .bin extension

dazzle46
15-08-2006, 11:16 PM
right CHEERS!

Stantheman
23-09-2006, 03:37 PM
Thanks For all your help guys I finally managed to do it

HiTreb
I have been trying this method
and it didnt work for me!
Pls would you tell how you did it?
Pls pm instrcutions
As i desperately need to get these boxes up
& running thanks
stantheman