PDA

View Full Version : CR2 can it be upated?



dmccric
05-08-2006, 08:43 PM
I have a Pace DiTV2000 that has cr2 software on it which comes on with a black screen,is there anything that can be done to update this to at least cr3,can the atmels be reprogrammed, I have the bins for the 2000 model.If anyone can help please do.

bammy
05-08-2006, 10:03 PM
It should update to the latest software as soon as it goes in stream, provided it hasn't had an anti-update mod done to it - are there any wires soldered to the board which look like they weren't original. Try a 4321 forced update. A bit more info would be useful - have you checked the netid is correct, do you know your cable feed is live?

dmccric
05-08-2006, 11:00 PM
cable feed is live, have tried the 4321 update, cannot see any wires on top - could they be underneath the PCB, the netid is set for my area.

Anymore info would be great

bammy
06-08-2006, 10:12 PM
Can you check the SNR in the engineer's menu?

howard
07-08-2006, 12:00 AM
check is site https://novice.modshack.co.uk/

IAmATeaf
08-08-2006, 05:10 PM
In order for the box to update the no update mod has to be removed if its present and the box has to set to the correct NetID and the update must be on stream.

I live in a excw area and the normal NetID for example doesn't have any updates on stream as the areas still running CR1, in order to get my Sammy updated I had to temporarily set the NetID to another, do the update then set it back.