PDA

View Full Version : can my box be cracked



n1qbal
03-08-2006, 11:48 PM
can i crack this box it is a pace di2000t and its smartcard version is
DNASPO11 RevBOC i know in the Novice gude it says DNASPO11 wont work but it is a little outdatedmaybe it can be cracked is therea new updated guide/tutorial.

thank u for any replies

stonned2thebone
04-08-2006, 12:39 AM
can i crack this box it is a pace di2000t and its smartcard version is
DNASPO11 RevBOC i know in the Novice gude it says DNASPO11 wont work but it is a little outdatedmaybe it can be cracked is therea new updated guide/tutorial.
thank u for any replies

you will need a t911/unlooper to open the card if the keys are fake then you will have to remove the attys read them an replace for that you will need a eeprom programmer with tsop adaptor

howard
08-08-2006, 10:31 AM
all box can be crack if you read the tut pages m8

stonned2thebone
08-08-2006, 02:49 PM
all box can be crack if you read the tut pages m8

in time yes you are proberly right
but not very helpful to the poster everyone starts some where
and if you dont ask where do you start

IAmATeaf
08-08-2006, 05:04 PM
Rev BOC can be unlocked as pointed out above so you should be able to get the IRD and BK from the card and re-prog the card 1 of the popular images found here.

Oh and by the way hope you're not talking about a subbed box mate as that tends to be a big no-no :)

thesparky
08-08-2006, 06:05 PM
if you do get a unlooper then use the BOD script it should pop in no time
btw there is another way of getting the bk from a di2000,
its a live voltmeter test,
(be warned it uses 240volts and is not for the faint hearted)
this method is untested by me but i am told it works fine

dangermouse
10-08-2006, 06:03 PM
try dropping it that will put a crack or two in it!!!!!!!

IAmATeaf
10-08-2006, 06:50 PM
try dropping it that will put a crack or two in it!!!!!!!

duff advice alert !!!! :)

dropping will only dent the box, don't know if a dented box allows the viewing of all channels. if you really want to crack it take the main circuit board out and step on it. v):)

n1qbal
10-08-2006, 06:58 PM
i got what i wanted out of this check my other post the one about the talkback

universall
10-08-2006, 07:43 PM
lol!! i have never seen that get the channels up:goodluck:

dj1978
13-10-2006, 05:32 PM
as long as you get yor valid bk and ird form the card it should not be a problem

Satch
15-10-2006, 03:24 PM
duff advice alert !!!! :)
dropping will only dent the box, don't know if a dented box allows the viewing of all channels. if you really want to crack it take the main circuit board out and step on it. v):)

LoL Funny you should say that, I did by accident the two pins that where sticking up where well bent over, ripped the crystal straight out the board and the battery had seen better days.

The Pins hurt when they stick in ya big toe.

Well it was a working stb I was putting back together.