PDA

View Full Version : Rawflash v3



tinkertiler
27-10-2011, 09:29 PM
cOz released Rawflash v3, which allows you to flash your NAND from Xell '2Stages' (RGH Xell):


Let's you flash full raw images (16 or 64MB) to your NAND. Started, as usual, via XeLL.

place "nandflash.bin" on the root of a usb device
start 2stage xell and shut off when prompted (replug power if you changed SMC)
- by default it checks blocks before writing, and will NOT overwrite or erase any block with ecc/other issues (perfect for fbbuild images with auto remaps)

small change to libxenon was required to silence non-error messages
tested on falcon, trinity and jasper 256

v3: re-re-refix bad block skipping so it skips it in both the dump and flash instead of just in the dump
v2: add big block support
v1: initial version



http://libxenon.org/index.php?topic=212.0

And before you ask its above my head at the mo diablo pmsl Will be looking into using it when we get hold of the coolrunner chips :)

Diablo13
29-10-2011, 01:07 AM
Your ok this time tink,...........I don't even know what questions I could ask! :( :hyst: