View Full Version : Err3_ Insufficient NVRAM
ndiqbal
02-08-2006, 04:20 PM
Anyone know how I can sort this out?
Its on a Phase 1B
Tried:
Removing card and cleaning but no joy.
Removed red jumper for 10 min, but no joy.
Left for 24 hrs, but no joy.
Pls investigate
stonned2thebone
02-08-2006, 05:22 PM
Anyone know how I can sort this out?
Its on a Phase 1B
Tried:
Removing card and cleaning but no joy.
Removed red jumper for 10 min, but no joy.
Left for 24 hrs, but no joy.
Pls investigate
if pulling the red jumper has failed the you will need to remove the nvram chip erase the put back then let it take its update
ndiqbal
03-08-2006, 11:27 AM
Thanks for the advise.
bluey1
03-08-2006, 12:12 PM
Anyone know how I can sort this out?
Its on a Phase 1B
Tried:
Removing card and cleaning but no joy.
Removed red jumper for 10 min, but no joy.
Left for 24 hrs, but no joy.
Pls investigate
what card you talking about m8 ????? --have you gave the simmcard a good clean---"make sure its a tight fit in the slot"
short out pins 16 +32 on the nvram for a seconed m8, see what you get from that-----"otherwise reflow the nvram"
apart from the above, "a knackered nvram or a bad connection on the atmels will give you error3"
Privateman
16-08-2006, 09:56 PM
stonned why remove the nvram? surely it gets cleared on the red jumper which removed the "hold" with the battery
vBulletin v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.