PDA

View Full Version : my 1st install



Magnu420
17-08-2011, 12:29 AM
ok guys this is my first install which took me about 4 months to install it lol
you all be thinkin why it took about 4 months to install,well when i first started
this i got everything set up apart from the dish,so when it came round to put the dish
onto the pole i got blown off the ladders (at troughing height) with a suddan gust of wind
that caught the dish,the dish landed safely ish but i never :( i ended up breakin my collarbone
and cracking 3 ribs,a big lump on my head and a bruised ego,i got a mate to put the dish on the pole
(cos me confidance has gone now when i go up ladders) told him what to do,he didnt do too bad
but for me its not 100%,i might attempt it if i get the courage or i might leave it as it is what do you think ????,these are the services am getting,all scanned apart from 28.2e


36.0e 5 services (scanned)
33.0e 3 services (scanned)
28.2e 661 services (not scanned)
26.0e 56 services (scanned)
25.5e 7 services (scanned)
19.2e 375 services (scanned)
13.0e 604 services (scanned)
0.8w 50 services (scanned)
30.0w 119 services (scanned)



To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. http://www.freeimagehosting.net/t/7e7.jpg (http://www.freeimagehosting.net/7e7)

notanotherone
17-08-2011, 12:45 AM
ok looks ok so far i cant get into 3rd picture with dish ,can the dish move 180 deg? what id do is put in the latest vhannibal settings e2 and then see see if dish and motor move to correct satalite ,could save you a lot of hassle rather than scanning each individual satalite

Magnu420
17-08-2011, 12:59 AM
i put sgt flopflips services and bouquets in forgot to say its a dm500,but the ones i put
in was for just 28.2e,not the multi-sat but will try the multi-sat one when the missis stops watchin
the tv lol, just realised that he's stopped doing multi-sats for E1 il have to convert some E2 into E1
im pretty imppressed with what i got atm on the 28.2e sats the signal varyin from 85% to 95%





edit: im using 97cm technomate dish,technomate 4 output lnb,10 foot scaffold pole,2xK brackets which i made,120mm x 12mm studding bolts using chemical anchor,webro wf100

notanotherone
17-08-2011, 01:03 AM
good signal strength what ones are you getting high and what is low ? is the ber ok? casue if it ok shouldnt be a problem whats picture like? does it break up ? does it pixilate ?

Magnu420
17-08-2011, 01:09 AM
on 28.2e sat the pix is good no pixelation or anything,but when i move onto other sats i get a few blank screens or pixelation,maybe il try the multi-sats services and see what i get with them

notanotherone
17-08-2011, 01:11 AM
tbh you wont get it perfect it seems to be good and on otheres that are slightly pixie it may be that transponder has moved and you mite only need a scan for it