PDA

View Full Version : Programming of VW remote key



kpwiik12
25-02-2011, 12:59 AM
Anyone that can tell me, where I can get softwear or a link for how to program an VW Passat 03 remote key?

pipehose
25-02-2011, 07:07 PM
VW/AUDI/SEAT/SKODA



Remote Control Programming (1997 ON)

Procedure
1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door using a second
key.

3. Using the remote control press the Unlock button once, and the horn
will sound once.

4. Wait 6 seconds and press the unlock button once to activate the coding
procedure. The remote control will now be programmed.

NOTE : When performing programming on additional remotes the procedure
is the same, except you press the unlock button 2, 3 or 4 times for the
different remote.

For example : If programming 2 remotes press the unlock button twice with
a 1 second interval between each press, repeat for 3 and 4 remotes.

5. Switch Ignition OFF.

6. Remove key from ignition and check for operation.

7. The coding procedure can be repeated up to 4 times for additional remotes.

8. The ignition must be switched OFF between programming each remote
control.

Remote Control Erasing (1997 ON)

Procedure
1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door using a second
key.

3. Press the remote control unlock button 5 times in 1 second intervals.
A short horn will sound.

4. Wait 6 seconds and press the unlock button once to activate memory
erase.

5. Switch ignition OFF, all remotes are now erased.

Models Covered:
· Lupo
· Polo
· Golf
· Bora
· Passat
· Sharan (Only Mk2 models as far as I know


This will only program the remote central locking, not the immobiliser. To program the immobiliser you need specialist diagnostic equipment, and the 5 digit pin code, but might be useful for people who have ordered a new remote to replace a broken one.

dogsbelly
05-11-2011, 05:43 AM
The software to change your immobiliser/pin is either vag com (which is older they have a newer on now but there are more guides to reprogram with vag com) or even easier use vag tacho. i have both vag tacho is so simple to use. You still need and obd cable for vag com, or vag tacho cable for vag tacho. both cheap on ebay. software is easy to get if they dont come with cables.

doug123456
22-11-2011, 03:47 AM
or vagcommander will do it