View Full Version : c. line
foxypepsi
29-09-2010, 08:33 PM
my c.line seems to stop working completley when a go on a channel that sends no signal try reboot and re-edit cfg file still the same
fergalsworld
30-09-2010, 10:51 AM
If you are using 2.1.4 try unistalling it and install 2.1.3 or visa versa.
notanotherone
30-09-2010, 11:31 AM
silly reply here but are you making sure that your cam is active?
humforce
01-10-2010, 09:15 AM
why not just delete the none working channels.
foxypepsi
01-10-2010, 09:17 PM
it seems like if the channel freezes and you go off the channel then back they all go off except fta channels
humforce
02-10-2010, 01:22 PM
use another image as ive tried loads of them and never come across that problem.
unless its a server fault.
foxypepsi
02-10-2010, 06:21 PM
i am running gemni image 4.70 maxvar ccam 2.14 its werid i could be watchin one channel then it freezes so i turn over then back they have gone off put film 4 on for 2-3mins they all come back on i think i will try darkstar 2 image see what happens
Ureyesonly
02-10-2010, 06:30 PM
use another image as ive tried loads of them and never come across that problem.
unless its a server fault.
I'd try this as it solved my problems I went from open pli to pli jade 3 usein 2.1.4 CCcam & no more trouble
foxypepsi
02-10-2010, 07:06 PM
ureyesonly can you sen me a link or the image pli jade 3 for my dm 500s
i think my box is a clone will this image be fine
Ureyesonly
02-10-2010, 10:18 PM
ureyesonly can you sen me a link or the image pli jade 3 for my dm 500s
i think my box is a clone will this image be fine
I'm not at home atm mate, I'll upload this the morrow unless some 1 else has done it.
Ureyesonly
03-10-2010, 07:55 PM
ureyesonly can you sen me a link or the image pli jade 3 for my dm 500s
i think my box is a clone will this image be fine
This is safe for clone's.
http://rapidshare.com/files/422919468/pli-Jade-dm500-20090627-6494.rar
http://www.mediafire.com/?yane1n4au9wrylm
vBulletin v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.