PDA

View Full Version : Error msg "Switch: Service could not be found



foxypepsi
23-09-2010, 07:27 PM
Error msg "Switch: Service could not be found got this on bcc + varouis channels
signal is fine on all just no picture

foxypepsi
23-09-2010, 08:16 PM
yes try all same message i tryed this

remote control
Menu
(6) Setup
Expert Setup...
Skip confirmation...OK..enable..green
Hide error windows..OK..enable...green then reboot

this works but after watching one of the channels for a while and you turn over from bbc1 to tiny pop its gone off reboot and comes back on

humforce
23-09-2010, 10:35 PM
you normaly get that if your useing motor settings on a single sat set up

foxypepsi
23-09-2010, 11:20 PM
ive got a fixed sly dish how do i change motor settings as you say

foxypepsi
24-09-2010, 08:43 AM
maybe my satellite configuration is wrong with fixed sly dish

this is my setup in satellite configuration

one single satellite

eurobird 1 /astra2aa/ab/2c direct connection

in motor setup it comes up with a warning box saying

found no lnb with DISEqC 1.2 enabled please goto satellite confignfirst and enable DISEqC 1.2

totally baffelled PLEASE HELP maybe this is why my channels go off when switching between certain channels

fergalsworld
24-09-2010, 09:58 AM
can you take a snapshot of the two menu's open ie and type http:// ip of dreambox
in there you should be able to grab one and attach it to your post

foxypepsi
24-09-2010, 10:36 AM
i dont know what you mean fergal ive put ip of box in internet explora i dont know what bit you want do you mean this
itv1 no picture
Stream Information
Service Name ITV1 Granada
Service Provider BSkyB
Service Reference 1:0:1:2760:7fc:2:11a0000:0:0:0:
VPID 0d14h (3348d)
APID 0d15h (3349d)
PCRPID 0d14h (3348d)
TPID 0934h (2356d)
TSID 07fch
ONID 0002h
SID 2760h
PMT ffffffffh
Video Format 544x576 4:3 25 fps
Namespace 11a0000h
Supported Crypto Systems 4a70h Dream Multimedia TV (DreamCrypt)
Used Crypto Systems 0960h: Videoguard (News Datacom), 0961h: Videoguard (News Datacom), 0963h: Videoguard (News Datacom)
Satellite Eurobird1/Astra2A/2B/2C/2D (28.2E)
Frequency 10757 MHz
Symbol Rate 22000 KSymbols/s
Polarisation Vertical
Inversion No
FEC 5/6
SNR 93%
AGC 93%
BER 0
Lock Yes
Sync Yes
Stream Information
Service Name Sky Comedy
Service Provider BSkyB
Service Reference 1:0:1:10cf:7d7:2:11a0000:0:0:0:
VPID 0206h (518d)
APID 0286h (646d)
PCRPID 1ffeh (8190d)
TPID 0909h (2313d)
TSID 07d7h
ONID 0002h
SID 10cfh
PMT 0101h
Video Format 544x576 16:9 25 fps
Namespace 11a0000h
Supported Crypto Systems 4a70h Dream Multimedia TV (DreamCrypt)
Used Crypto Systems 0960h: Videoguard (News Datacom), 0961h: Videoguard (News Datacom), 0963h: Videoguard (News Datacom)
Satellite Eurobird1/Astra2A/2B/2C/2D (28.2E)
Frequency 11836 MHz
Symbol Rate 27500 KSymbols/s
Polarisation Horizontal
Inversion No
FEC 2/3
SNR 91%
AGC 91%
BER 0
Lock Yes
Sync Yes

humforce
24-09-2010, 10:44 AM
maybe my satellite configuration is wrong with fixed sly dish
this is my setup in satellite configuration
one single satellite
eurobird 1 /astra2aa/ab/2c direct connection
in motor setup it comes up with a warning box saying
found no lnb with DISEqC 1.2 enabled please goto satellite confignfirst and enable DISEqC 1.2
totally baffelled PLEASE HELP maybe this is why my channels go off when switching between certain channels
that is correct it should not be finding a motor
your switch prob could of been from you changeing the type of sat config
you might need to reflash and start again

foxypepsi
24-09-2010, 10:52 AM
it seems like if you watch freesat channels then go to sly movies or music sub channels the freesat channels go off like bbc 1 itv but if i reboot box and go to bbc etc they come back on i got the box already set up with time language etc maybe they guy slected DISEqe with motors at first start up

humforce
24-09-2010, 10:57 AM
it seems like if you watch freesat channels then go to sly movies or music sub channels the freesat channels go off like bbc 1 itv but if i reboot box and go to bbc etc they come back on i got the box already set up with time language etc maybe they guy slected DISEqe with motors at first start up
that is what i was saying
reflashing will sort it out.

foxypepsi
24-09-2010, 11:08 AM
could you point me in the right direction as in image for my dreambox 500s which is best and i dont know if mine is real or not so i dont know what image the box has to be flashed with the the gemni project on it now + the tools needed thanks

fergalsworld
24-09-2010, 11:55 AM
Before you flash it is it connected to your router/internet to get certain channels?
I would flash it with nabilosat darkstar 2 use dreamup
http://www.world-of-digital.com/forums/f301/nabilosat-dm500-darkstar-ii-33670.html

foxypepsi
24-09-2010, 12:07 PM
yes it is connected to internet via router

fergalsworld
24-09-2010, 12:52 PM
Do what i have said in the pm then flash it and carry on posting here.