PDA

View Full Version : Im missing channels on a DM800



Sh0t2bts
21-06-2010, 09:18 PM
Hi All,

I copied my bouquets from my Vu+ Duo to a DM800 (located about 8 miles away) but lots of channels are not working it comes up "Tune Failed", BBC2 is 1 example I did a rescan and no BBC2 is listed even whan I search under Satellites, Im looking at Satallite 28east.

The Signal Strength is 97% for that Sat..

Any Ideas on what im doing wrong would be great

notanotherone
21-06-2010, 09:25 PM
when you go thro the "all services " set up do you have lots of say bbc1's ?if so try and find one that works

Sh0t2bts
21-06-2010, 09:29 PM
Yes I have lots of BBC1's listed, but its BBC2 im missing or are you saying that BBC2 could be listed as BBC1?

Cheers

notanotherone
21-06-2010, 09:59 PM
Yes I have lots of BBC1's listed, but its BBC2 im missing or are you saying that BBC2 could be listed as BBC1?
Cheers
opps sorry i read that wrong nite shift blues :roflmao:what ive found is you know when you get to the start of your all services list ,you may have some channles which are only numbers say 1095 i have found bbc 2 and other channels have been listed under numbers rather than their names check them and if you find it you can rename it bbc 2 i found bbc3 that way

Danny-D
30-07-2010, 01:16 AM
it will come back, had this problem also and next day its back to normal, very strange