PDA

View Full Version : Belkin F5D7230-4 Router



fergalsworld
26-03-2010, 02:14 PM
Belkin Wireless Cable/DSL Gateway Router
Model No: F5D7230-4 version 1000uk
My m8 has gave me this to look at for him basically you can get on the net when hardwired but get a limited no activity warning when going wireless and can't get on the internet

The thing that has me baffled is that i have done numerous factory resets
holding the reset in for 10 seconds when powered on but it just wont let me login to the router homepage
i have tried 192.168.2.1 and 192.168.2.254 it just comes back with
Internet Explorer cannot display the webpage its doing my nut in lol
Any ideas?

Magnu420
26-03-2010, 11:02 PM
can you log in to the status page when useing the ethernet cable
when you reset everything they will be no password so you need to press
log in button,have you tried re-bootin everything modem,router,pc

ps i got this this router and i had probs when i first got it the only
thing what was stoppin me from connectin wireless to it was the channel
it was set to in the settins of the router,i spent a good couple of hours
speakin to someone on live chat from belkin then he sussed me problem

fergalsworld
26-03-2010, 11:04 PM
From my first post
The thing that has me baffled is that i have done numerous factory resets
holding the reset in for 10 seconds when powered on but it just wont let me login to the router homepage

Reddevil
26-03-2010, 11:07 PM
If you connect to the router via network cable and check network connections.

Default gateway should be IP to access settings page, it may have changed from defaul, or your router may be having a problem.

Magnu420
26-03-2010, 11:16 PM
From my first post
The thing that has me baffled is that i have done numerous factory resets
holding the reset in for 10 seconds when powered on but it just wont let me login to the router homepage
try holding the button a bit longer it might help

thesparky
27-03-2010, 01:17 AM
if the NAT was disabled then your login will be 192.168.2.254, try that then enable NAT or better still reset defaults

the rest is a pain, power off, press the reset for 30 seconds, power and still holding the reset then release after another 30 seconds

berley
27-03-2010, 12:35 PM
belkin have a lifetime warranty, the power supply died on my one and they sent a new one out the next day

have your serial and model number ready if you phone them up