PDA

View Full Version : Alarm system



10mg
03-11-2009, 12:13 AM
Looking for a user manual for an alarm system. We know how to set the full alarm but would like to exclude some zones etc. We never got an instruction manual as it was already installed in the house.


All it has on the front is A1 think that must be the make. No model number.

didsss
03-11-2009, 01:49 PM
Check to see if there is an "omit" button arm the alarm press omit and the coresponding zone number on the key pad....
Give it a go whats the worst that could happen...!
Also try Technical Manuals Online! - Telecom Manuals, Telephone Manuals, Alarm System Manuals (To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. and see if any match up

rumpole
02-01-2010, 09:27 PM
I used to fit A1 panels in the 90s. if it is all brown or blue the chances are it is an Omnicron. I would strongly recomend replacing as out of the 40 or so i fit i have been back and replaced about 18. They also dont have a NVM so if it has had poor maintenance ie battery not replaced, once the panel looses power it will go back to factory set.

10mg
08-01-2010, 08:11 PM
Yes this one is a lightbrown colour. If we were to replace it which panel should i change it too?