PDA

View Full Version : mosc password help



chrisd
01-11-2009, 12:11 PM
trying to reprogram a mosc card but its been passworded by a trader which software should i be using to break this also i managed to read this via nagra 4.1 but when i went to write to it , it asked for password again,why have the boxes went down is there been a key change, thanks.

thesparky
01-11-2009, 12:15 PM
does it ask for a 16 digits card lock number or the backdoor number (32 digits)

chrisd
01-11-2009, 01:07 PM
32 digits, managed to open it now sparky and read it using edca5e pass but i have another 3 boxes off the same guy to do for family , why have the boxes went down as mines is still ok , cheers

DessertDog
01-11-2009, 01:08 PM
trying to reprogram a mosc card but its been passworded by a trader which software should i be using to break this also i managed to read this via nagra 4.1 but when i went to write to it , it asked for password again,why have the boxes went down is there been a key change, thanks.
Ok in my area Chris on mosc all boxes
The cards may have been dated m8

chrisd
01-11-2009, 01:11 PM
Ok in my area Chris on mosc all boxes

all the boxes are mosc , not done this for a while now , is it just the keys that should be changed although the box i done last week it was just the date that was needing done

DessertDog
01-11-2009, 01:16 PM
If you have checked the date when you read it and its ok then i think its just the k*** m8 never done one myself sorry

thesparky
01-11-2009, 01:16 PM
yeah normally an image stops once the date run out on each tier, commonly the rights date, as the expire dates will be big

chrisd
01-11-2009, 01:17 PM
il give it a try later on and post back the results also is there a guide for nagradate on here as cant remember which should be changed thanks

thesparky
01-11-2009, 01:21 PM
just use nagratimedate, or nargadate simple put in the date you want and click "to nagra", the program then convert it for you, then just copy what is in there nagra part and put that in the standard tier

just a note the date format is mm/dd/yyyy

chrisd
01-11-2009, 01:52 PM
cant find the standard tier for the date?

thesparky
01-11-2009, 02:56 PM
then if you used edcases D2C file to reset the BD's then the tiers will be erased, just load an image for your area/old provider and away you go

chrisd
01-11-2009, 03:20 PM
sorry for the noob question sparky but how do i load an image ?

chrisd
01-11-2009, 03:23 PM
got it now, thanks sparky your a genius m8 and sorry for the double post

thesparky
01-11-2009, 03:24 PM
look in the downloads section for a rom11 image, choose the one that from your old provide, IE
t*w, excw or pure

open it up and put in the ird ending 12
put in your bk
convert the barcode on the card to get a unique camid
go to the standard tier and check the expire and rights dates (check each standard tier)
once done save the image and write to card

chrisd
01-11-2009, 04:30 PM
how do i convert max channel using win calc and hex?

thesparky
01-11-2009, 05:17 PM
you dont m8, you find the tier list for your area and use the min and max from that to make a working standard tier

chrisd
01-11-2009, 08:22 PM
think i have got the hang of it now , 2 boxes done 2 to go

ace12345
01-11-2009, 11:42 PM
Where can i get edca5e pass from?

Sicilian
02-11-2009, 06:47 AM
Where can i get edca5e pass from?

Look here http://www.world-of-digital.com/forums/f74/a3e_b09-script-31451.html

chrisd
03-11-2009, 01:49 PM
one of the boxes i done had the 8888 error , then i managed to get the box on and program a mosc card but my aunt phoned and the box is stuck on ld20 now , this box was working fine plugged into my connection , heard it could be netid? or bad connection/signal how do i alter the net id? im in a pure area thanks

mickyrobbo
03-11-2009, 09:37 PM
yeah normally an image stops once the date run out on each tier, commonly the rights date, as the expire dates will be big
Some traders will make the right dates and expire dates the same so check both m8

mickyrobbo
03-11-2009, 09:41 PM
one of the boxes i done had the 8888 error , then i managed to get the box on and program a mosc card but my aunt phoned and the box is stuck on ld20 now , this box was working fine plugged into my connection , heard it could be netid? or bad connection/signal how do i alter the net id? im in a pure area thanks
pure area will fix its own netid ,,as for ld20 it can be down to bad connections or being turned off ,,altogather m8 so make sure she has not been turn off,,if it works in your house you will need to check everthing at her,s starting with the main connection