PDA

View Full Version : Wave 4



tinkertiler
17-10-2009, 09:33 AM
Quoted from abgx360 (http://abgx360.net/index.html#)

==============================
Wave 4 and YOU v1.1 by Kushan
==============================

A n00b's guide to everything Wave4

================
What IS "Wave 4"?
================

A regular, retail Xbox 360 disk is split into several sections or "partitions". One of these partitions is known as the "video partition". Before March 2009, this partition simply contained a video that would play if you inserted the disk into a regular DVD player, the video would basically tell you that you were an idiot and need to put it into an Xbox 360 to play it.

One of the ways Microsoft can detect you being a dirty, filthy pirate is to scan this video to make sure it matches with what is supposed to be on the disk, so to protect you, the firmware itself does a quick checksum of it and if it doesn't match with known video data, it wont boot. Every now and then, this video changed, with each change being called a "wave".

Normally, system updates (dashboard updates) are stored on a different part of the disk, taking up about 8Mb of space, however in November 2008 Microsoft launched the "NXE", a completely new Dashboard for the system. Along with the new dash came Avatars, making the whole update substantially larger (somewhere in the region of 130MB). This meant the update wouldn't fit on the disk in the same partition that previous updates were located and so instead the update was placed within the video partition. This was known as "wave 3" and hit around March 2009.

As Microsoft now distributes new Dashboard updates in the same partition, each time the 360 gets a software update, we will see a new "wave" a few months later. There was a Dashboard update in August 2009 and that is now being distributed with the latest games. This is known as Wave4. Its identical to Wave3, except the video partition now contains the August 09 Dash update. The first known game to have this was Cars Race-o-rama.

Now, its important to remember that iXtreme was designed to PROTECT you and part of that protection is the "video partition" check. When this video partition changes, the firmware doesn't know if its just a new "wave" or if its a bad rip and thus opts to not boot it.

When wave 3 hit, iXtreme 1.51 was quickly released to tackle the problem. This was a temporary fix only, the firmware simply does not do the video partition check and thus boots ANY wave, up to wave 4 and beyond.

However, this in itself is "unsafe". If the disk is fine, then you'll be fine, but if the video partition is in any way corrupt, iXtreme 1.51 will still boot it and thus you could be detected by Microsoft and banned. This also is not helped by the fact that some impatient, idiotic people decided to "patch" Wave3 games with Wave2 data in order to get iXtreme 1.5 or below to boot it. This is a great way to get yourself banned and thus iXtreme 1.6 was created.

ix1.6 will only boot games that have the CORRECT video partition, up to and including wave 3. This means that if you have a Wave 3 game that was patched with a Wave 2 video partition (aka a great big bullseye for Microsoft to target), iXtreme 1.6 will not boot it but ix1.51 will.

================
Will I need a new firmware to play Wave 4 games?
================

IF you are on iXtreme 1.5 or below, Wave3 games will not boot for you and thus Wave4 games will not either. In this case, YES you need to update your firmware!

IF you are on iXtreme 1.51, then ANY wave will boot fine, including Wave4 however you must be EXTRA careful as you are not protected against corrupt or incorrect video partitions. This is one of the many reasons to always use abgx360. If a game is fully verified, playing it on iXtreme 1.51 is just as safe as playing it on iXtreme 1.6 - this includes Wave4 games.

IF you are on iXtreme 1.6, you can ALSO play Wave 4 and above games, however you need to use a special activation disk to do so. This was added to the firmware specifically for this eventuality - the disk activates "one-shot-boot" mode, essentially it allows iX1.6 to boot any game you insert into the drive, even if its not properly stealthed. You simply insert the disk into the drive, let it spin up (it will say "play DVD"), then swap in your Wave4 game. You will need to do this each time you want to play a Wave 4 (or above) game. Don't worry, if the game has all the necessary stealth data, then iX1.6 will still use it, so if you boot a VERIFIED Wave4 game using this method, you should be just as safe as you were booting a verified wave 3 game.

The disk is available here: hxxp://To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. and needs to be burned to a DUAL LAYER disk, but entirely on the first layer (do not set a layerbreak and when imgburn prompts, tell it to burn to the first layer only).

A new iXtreme firmware will eventually be released with strict wave4 support (no activation disk needed), however some time needs to pass before this happens. Although Cars: Race-o-Rama was the first game to appear in the wild with Wave 4 video, it was not necessarily the first game to be pressed with it. Also, during a wave transition there are often a few exceptions to the process which also need to be known about. There will be no timeframe for this, so do not ask.

================
What about abgx360? Will that need to be updated?
================

abgx360 v1.0.1 (latest as of time of writing) does not recognise a "wave 4" image and will report a POSSIBLE corrupt/bad PFI/Video partition, however the program is actually still completely compatible with Wave 4 games. Once a Wave4 title is verified, abgx360 will still download the .ini from the database and fully check out the image. If the image matches and the game is verified, then it has also passed the stealth checks and thus it is as safe to play as any wave3 or wave2 game.

abgx360 v1.0.2 will be released with full Wave4 recognition in a similar manner to the new iXtreme; that is once the transition date is known and any exceptions are noted.

Diablo13
18-10-2009, 05:15 AM
That's a very useful explanation tink. Our mutual friend was explaining that to me yesterday, though obviously not in as much detail.
Reading it explained like that has given me a much clearer picture of why and what is happening. Thanks for the help.

Incidentally I read elsewhere that the new "Lips Music Collection" is also a Wave 4 release, so people should be aware of this before trying it.

tinkertiler
18-10-2009, 10:51 AM
You will find that All the new games that come out from now on will be wave 4. There will only be a few that are wave 3 from now. So if anyone is thinking of downloading COD when it comes out then now is the time to get your system sorted before release.

tinkertiler
18-10-2009, 04:40 PM
*Update* "Looks like we were wrong in assuming that iXtreme v1.51 was fully compatible with 4th Wave PFI/Video. Turns out that only Hitachi iXtreme v1.51 will boot 4th Wave backups, and BenQ/LiteOn/Samsung iXtreme v1.51 will NOT boot 4th Wave. It would have been fully compatible if only the Video data had changed but not with the change in PFI (capacity). So currently the only safe option for booting 4th Wave backups on a BenQ/LiteOn/Samsung drive is to use iXtreme v1.6 and the one shot boot disc."

New firmware is supposed to be out next week

Diablo13
18-10-2009, 05:02 PM
Thanks for the update tink, keep us posted on developments.
I thought the Lite On drive was their newest and best installation?
Seems strange that it won't support wave 4 as well. I sometimes wonder if Microshaft are tying themselves and us in knots on purpose.!

tinkertiler
18-10-2009, 05:20 PM
All it is the way the Hitach firmware works i suppose and the way they have hacked it. With the hitachi all you do is patch the firmware with the samsung/lite on and benq they all had to have the firmware altered in such a way that you have to re flash the firmware. All being well the new firmware will be here next week and all should be well again. Someone we know will be busy when its out LOL