PDA

View Full Version : mosc help



chrisd
13-05-2009, 07:28 PM
hi i need to download nagraedit 4.1 to use with a infinity phoenix programmer can anyone point me in the right direction for this also is there a tutorial for putting this card back on thanks in advance

DessertDog
13-05-2009, 10:21 PM
hi i need to download nagraedit 4.1 to use with a infinity phoenix programmer can anyone point me in the right direction for this also is there a tutorial for putting this card back on thanks in advance
Try here M8:

http://www.world-of-digital.com/forums/f74/mosc-tut-31189.html#post165290

chrisd
13-05-2009, 11:25 PM
thnks dd keep gettiong this error now ?

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 54
CamID:** ** ** **
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

DessertDog
14-05-2009, 06:48 AM
Sorry m8 i know nuffin about these cards hopefully someone else can help you on that.

chrisd
14-05-2009, 10:09 AM
anyone else know a way round this?

chrisd
14-05-2009, 10:31 AM
just opened the box and there is 2 sets of numbers written inside

Sicilian
14-05-2009, 10:52 AM
DD posted this for you yesterday :)

http://www.world-of-digital.com/forums/f74/mosc-tut-31189.html#post165290

chrisd
14-05-2009, 10:58 AM
anno sicillian but i think whoever i got the box from has put a password on it and he is unavailable now, was looking for ways to bypass this, cheers anyway m8

Sicilian
14-05-2009, 11:27 AM
It looks like the card has a blocker on it. I take it you need the card details. What box is it? There may be some other way.

chrisd
14-05-2009, 12:58 PM
its an old pace box 4010

Sicilian
14-05-2009, 01:39 PM
its an old pace box 4010

That box can be Jtagged to obtain the BK.

I think this is what you need + some other software: -


http://www.tailor-madecircuits.com/shop/product_info.php?manufacturers_id=10&products_id=40

chrisd
16-05-2009, 10:48 AM
cheers sicilian and dd got it working now , though i had to redo it with a fun card

john0745
17-05-2009, 05:27 PM
since you have done a fun card and the box is working ok, then its obviouse you have the card details.
If you run the card through "Cardtolls" by clicking "Reparar" this will resset the backdoor keys allowing you to read and write to the card again.Cardtolls deletes all the card details tho, but the card will be usable again.

chrisd
17-05-2009, 10:23 PM
managed to get into card using a3e b09, so can i just program the card using nagraedit now ? sorry for stupid question but where is the latest image file? thanks :thumbup:

john0745
18-05-2009, 01:23 AM
according to your post the provider is 54 = ntl//. check the rights and expiry before you write to the card.

tp://rapidshare.com/files/234204525/rom11_blocker.rar.html

Sicilian
18-05-2009, 10:57 AM
managed to get into card using a3e b09, so can i just program the card using nagraedit now ? sorry for stupid question but where is the latest image file? thanks :thumbup:

Now that you've used that script you will need to use a rom 10/11 image setup for your area. There are some good blockered images floating about.

Make sure you use a rom 10 or rom 11 image depending on what your card is.

chrisd
18-05-2009, 02:03 PM
it let me go so far into the tutorial for nagraedit then a single password box came up? just ran the card through cardtolls, reparer with delays 350 150 350.and thanks i already had the rom 11 blocker image just didnt know what it was , john how do i check the expiry etc , still new to this as only had programmer a couple of days thanks

chrisd
18-05-2009, 03:26 PM
after running cardtolls and going through tutorial it lets me get to the read card agn before Eeprom editor then bad password comes up again ?

Sicilian
18-05-2009, 03:31 PM
after running cardtolls and going through tutorial it lets me get to the read card agn before Eeprom editor then bad password comes up again ?

Run the a3e b09 scrpit again through nagradedit.

chrisd
18-05-2009, 03:40 PM
cheers sicilian its much appreciated bud :thumbup2:

chrisd
18-05-2009, 04:01 PM
same thing happening sicilian what way should ird be put in? i know its back to front

Sicilian
18-05-2009, 04:03 PM
normally back to front as you've stated.

chrisd
18-05-2009, 04:14 PM
should bk be back to front too?

Sicilian
18-05-2009, 04:30 PM
should bk be back to front too?

No it should not.

chrisd
18-05-2009, 05:03 PM
still the same thing and i have used both cardtolls and dc2 file , lets me get so far in tutorial then when it rereads card get password error again ?

chrisd
18-05-2009, 05:40 PM
got it working now sicilian and john cheers ,i didnt change the expiry date , is this meant to be set to a specific number or does it not matter now ?

preetstud69
13-09-2009, 11:03 AM
Hi chrisd, iam in the same situation as you explained,how did you get past the password issues??
cheers