PDA

View Full Version : what does this mean i am stuck



steve07951
09-07-2006, 01:31 PM
what does this mean.....Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful...............i tried nagra edit 4.1 and
XNCS but all i get is this thanks for any help you can give
cheers steve

thesparky
09-07-2006, 01:54 PM
you need to start pheonix mode 3.68 on your programmer m8

steve07951
09-07-2006, 05:52 PM
programmer is set up corect its just that it wont read but the eng menu on cable box says mute err on the card menu it wont even say wot rom it is

Donnie Darko
09-07-2006, 06:21 PM
no atr=fooked card

thesparky
09-07-2006, 06:25 PM
try another card in the box just to check the card reader if not as Donnie puts it "fooked card"

clamdog
10-07-2006, 12:43 AM
try rebooting your pc then try nagra 4.0 or 3.0 ive had that and it worked for me

lovey
26-11-2006, 12:36 PM
what does this mean i am stuck

--------------------------------------------------------------------------------

what does this mean.....Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful...............i tried nagra edit 4.1 but all i get is this thanks for any help you can give

telboy
26-11-2006, 01:01 PM
it means that card was fried mate , when cc's zapped them last week it must have been in the box when they knocked them out. you will get no info off it . its now a ice scraper as they say

DessertDog
26-11-2006, 01:22 PM
As it has been said time and time again No Atr then its scrap no use dead Fooked call it what you like but dump it