View Full Version : Please Help - Sammy prob
derbyc316
09-07-2006, 12:17 PM
Sorry to post this again but my other box is fooked & I am getting hassle from our lass.
How do I get the Bk from a sammy with firmware build version 3_2B_P12N_N-s2100
I have got a Jtagg connected someone said use OCD but what commands?
Please help me
if its a sammy 2100 and pure n-l i use this byte in bke 2.2 =0x00f6a8a8
derbyc316
09-07-2006, 12:36 PM
Can anyone post bke 2.2 please?
derbyc316
09-07-2006, 12:41 PM
Sorry its Ex C&W as well
derbyc316
09-07-2006, 07:02 PM
Only gave me IRD BK still blank
Is it because the box has updates?
dave_c
09-07-2006, 07:28 PM
i found it best to load the drv load first , then jtag the box then boot box up then leave box about a minute after the display goes blank or comes up zero on the disply then press connect on bke
derbyc316
09-07-2006, 08:02 PM
BK still all 0's
I bet they have moved the location in the new software update.
Davic gives me a BK so I'll try that
Chookey
09-07-2006, 10:59 PM
Only gave me IRD BK still blank
Is it because the box has updates?
Did a sammy last week using those bytes, updated first, press down button when LD20 is displayed, release when LD40 is displayed. Click on connect(bke) when 0 is displayed.
Short the battery and update again, then follow above. Should work.
Chookey.
2tone
10-07-2006, 08:33 AM
Have you got your ntl card in the box when you jtag it from what i know you have to have your card in it dont mater if its not the card that came with the box as long as it's a cc owned card always works for me and follow as chookey says wait till you see 0 on the display before clicking connect
dave_c
10-07-2006, 11:44 AM
dont think it really matters if you have a card in the box or not when jtagging it , mite just be personal choice , i done a few sammys and paces , but never hd a card in any , i usually just make sure t/b is cut first , then put the box back on the stream to update , then jtag it , had no probs so far .
taz81906
11-07-2006, 12:03 AM
hi
try these bytes in bke im sure 1 of them will work im on ex c&w various ones of these have worked on the boxes i have done
0x00F6A798
0x00942d24
0x00F6A8A8
0x009004E4
0x00931C58
0x00931C54
0x00931BE4
0x00931ccc
0x00941464
0x00941460
0x00942D24
0x008F16B0
0x00A0E6DC
0x00902704
let us know how you get on
vBulletin v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.