View Full Version : Still nothing
plasterer
04-07-2006, 09:33 PM
Just workin on a d box 2 now Tried several images . just get waiting for time even with known working service files off me other box One thing i have noticed is when i do a scan as it goes through the frequ s it does not go in order ive never had this b4 ...eg
35000
46000
80000
27000
at the end finds all transponders but says no channels found do a scan box is on a direct feed no splits or nothing addad other box works fine on this input
Any idears lads
Scotster
04-07-2006, 09:49 PM
What images have you tried? What kind of box is it?? Was it working previously?
Scott =op
gav12345
04-07-2006, 09:50 PM
Just workin on a d box 2 now Tried several images . just get waiting for time even with known working service files off me other box One thing i have noticed is when i do a scan as it goes through the frequ s it does not go in order ive never had this b4 ...eg
35000
46000
80000
27000
at the end finds all transponders but says no channels found do a scan box is on a direct feed no splits or nothing addad other box works fine on this input
Any idears lads
check your level ber / snr / sig
stick with the latest images as best to do this
try the jedi m8 help
Scotster
04-07-2006, 10:11 PM
Not meaning to undermine you mate but if someone is having problems scanning etc its better to use the older images such as sportster 1.75
They just seem to find more channels etc on trouble boxes.
Scott =op
plasterer
04-07-2006, 11:41 PM
Tried several sportsters pro 1.75 ultra got jedi on it at the mo backed up me old image files bow k transferd the lot to this d box 2 still nothing .This is not my box but it has been working
BER26214
SNR44000 ish
SIG41000i
shI know me BER is 10 mile high wot would cause this cheers big ears lol
rhonda
05-07-2006, 01:44 PM
Tried several sportsters pro 1.75 ultra got jedi on it at the mo backed up me old image files bow k transferd the lot to this d box 2 still nothing .This is not my box but it has been working
BER26214
SNR44000 ish
SIG41000i
shI know me BER is 10 mile high wot would cause this cheers big ears lol
Looks like a f**ked tuner m8. Your snr should be above 55000 best is 63000, or maybe cc have disconnected you at the gr**n box this happens ever 6 months in my area.
Devilfish
05-07-2006, 01:53 PM
The SNR value isn't strong enough. It needs to be over 55,000 before you'll get any channels.
My mate brings his Nokia to me every now and then because he's fooked it up and it doesn't work in my house...my signal must be too low because the SNR is about 46,000 on his box. In his house, it's ok, it's well over 60,000. Yet I have split my cable 3 times (1 dbox, 1 dreambox, 1 cable modem) and all my boxes work fine.
Try removing any splitters or attenuators and connect it to the main feed. Check the SNR value again. The BER value will remain high until you get a channel...this always confuses people. The SNR is the most important value.
notanotherone
05-07-2006, 02:52 PM
this is what i done with my troubled box i put on pacino 2.1 attached a booster and it worked now this box i have ,came with waiting for time and now it works with everything it dont like commando one little bit (nothing against the image it just dont like it )hey its worth a try
plasterer
05-07-2006, 04:14 PM
Thanx for your advice mate went direct to feed with a known working image And bingo .Put it back into me splitter and nothing . Wot do i need to get to keep the box running on me splitter Thanx again Paul
fergalsworld
05-07-2006, 06:31 PM
Try a different splitter get a low noise one they are about a fiver
or try the "SLX" booster from argos 3.99 at the moment.
if it dont work you can always get a full refund.
Hunter
05-07-2006, 08:29 PM
try another line (a mates perhaps)
if that dont work it sounds like your tuner is fooked m8 /:)
plasterer
05-07-2006, 11:07 PM
Cheers fergal give it a go nothing to loose Ta pal
fergalsworld
05-07-2006, 11:17 PM
This is the booster to get m8
Shop for 1 Way Aerial Booster. at Argos.co.uk (To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. soz 4.99 now.
Here is the splitter
2-Way F Splitter (To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Hope this helps if it does hit the thanks button lol
plasterer
05-07-2006, 11:30 PM
Do you feed in with your main cable feed . Wot leads do you need for the Out feed and will this fit into d box with f connector cheers again
fergalsworld
06-07-2006, 12:08 AM
Cable feed to the booster input and then cable from the booster output to your box
You can get cable and converters from b&q
black sattelite cable 8.99 a roll,cable adaptors 98p and f connectors 98p.
plasterer
06-07-2006, 03:06 PM
Cheers mate :wink:
vBulletin v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.