PDA

View Full Version : Evocamd basic



UncleDave
17-04-2008, 09:08 PM
I'm really struggling to get evocamd working (as in I can't). I've followed all the idiot signs that I can find but must be missing something. Is there a log file that evocamd writes out or any kind of debugging information that I can find to so what I'm doing wrong?

Thanks

UD.

glyndwrw
29-04-2008, 07:40 PM
I don't know if this will help but I am having problems with evocamd and have put a request for help to automate it.
Regarding your problem ,evocamd can be started by clicking on a channel and if you have digiworld 2.0 press the blue button (I,m not sure about digiworld 1.6 but it,s probably the yellow button ). You will then see the DW control panel.
There are 2 rectangular boxes. If you do not see evocamd in the top box press the left or right key opposite the o.k. key.
This should show evocamd in the box. Press the ok button and evocamd should then start and providing you don,t switch the power off or reboot then everything should work.
If you do switch the power off or reboot repeat the above.

renwich
16-09-2008, 08:56 PM
try via telnet evocamd -D