PDA

View Full Version : TVlink for Sky



bap_cfc
13-04-2008, 09:54 PM
I have tryed setting this up in the house but cant change the channels in the room were the link is,everyting is connected but in the manual it says to tune to the RF channe whinch i cant find?

Any help would be great.

Thanks
Bap_cfc

thelostone
14-04-2008, 12:13 AM
found this dont no if it will be of any use to you
If the red LED does not light on the TV Link you will have to enable the RF2 output on your SKY Digibox :
Press SERVICES
Press 4 for SYSTEM SET-UP
Press 0 , 1, SELECT - you should now see the ?Installers Menu?
Press 4 - ? RF OUTLETS?
Scroll down to ?RF OUTLET POWER SUPPLY and right arrow to change to ?ON?.
Make a note of the ?RF CHANNEL NUMBER? generally this is set to 68
Scroll down to ?SAVE NEW SETTINGS? and Press SELECT to store the changes
Press BACKUP to go Back to your Sky channel
Having done this you will find that the little red LED light on the TV Link will now be lit confirming that you have correctly turned on the power to the link and that your cable and connectors have been fitted correctly.
Now tune the TV to the SKY Digibox signal.
To do this select the TV channel you wish to be for SKY then tune this in to the number you made a note of previously i.e. 68.
When this is completed when everything is switched on you should now be able to view your SKY channels you will find you can control your digibox functions
one other thing mate i understand you need to get this sorted but if you post the same thing in another section it will only get deleted just thought you should no:goodluck:

bap_cfc
14-04-2008, 09:28 AM
Cheers mate, just wasnt to sure if i had posted it in the right section

Thanks
Bap_cfc

thelostone
14-04-2008, 12:26 PM
Cheers mate, just wasnt to sure if i had posted it in the right section

Thanks
Bap_cfc
Not to worry mate if it was in the wrong section i am sure a mod would move it