PDA

View Full Version : starview



raju
24-12-2007, 08:36 PM
hi,my starview box stopped working it had 400e software,now i have down graded to 300e but its not up dating at all i get is bad data.emu is on.can any body help plz.

jal
29-12-2007, 09:15 PM
check the cable behind the box if it's correctly inserted if yes, then try to put the codes manually, if it works then put the 400ee softwere back and that should work.

happy new year.

Dr X
01-01-2008, 05:00 PM
Hi raju
First m8 you need to check if you have a geniune starview or a clone one, as this is a major part of which software you need to put on it.
What i mean by this is, if its a clone then you dont want to put on the 400 or 300 but the 257 version, and updating will be done via remote which will be just the two code change eather on key 00 or key 01 which is ever the change.
If you have a geniune starview then the 400 will work fine with AU codes.
Check the system info here on the forum and see if yours is a clone or geniune one and then flash accordenly as flashing the wrong one to it can kill it on you so be carefull m8.

Dr X

wasimmm
05-01-2008, 08:14 PM
What do you mean by saying it "stopped working" ?

AU works fine on version 4.