PDA

View Full Version : No Channels



karlosfandango
24-06-2006, 08:51 PM
Ok b4 I flash me box, i lost my channels and am getting a message saying no channels. I scan for channels and am getting some but after saving and rebooting i get the same message I have no channels, any ideas?

renwich
24-06-2006, 09:00 PM
Ok b4 I flash me box, i lost my channels and am getting a message saying no channels. I scan for channels and am getting some but after saving and rebooting i get the same message I have no channels, any ideas?


read my signatur m8 it will tell you all the info that is required for you to provide so we can assist in your problem m8

karlosfandango
24-06-2006, 09:09 PM
ok i am running pacino 2.1 on a nokia dbox2 with evocamd has been running for a while now, usually jusr reload the evocams when i have probs

renwich
24-06-2006, 09:12 PM
have you got a recent backup of your services files.? has the ucode or camdbeen changed,

fergalsworld
24-06-2006, 09:14 PM
Are all your settings correct in the scan menu
also try changing ucodes press
blue,blue,blue,green,red
also try a different camd "mgbcamd or newcamd"
How many channels and transponders does it find doing a scan?

karlosfandango
24-06-2006, 09:16 PM
no, cam and ucode the same i have services and bouquets saved but ran me xover upstairs thru the window and have broken one of the wires so will have to wait till tomorrow to get another.

fergalsworld
24-06-2006, 09:18 PM
Read my post above m8

karlosfandango
24-06-2006, 09:19 PM
only finding 99 tv channels with fastscan off nothing with fastscan on, but still not working after a scan?? is there maybe something i am doing wrong after the scan, i save settings then reboot.

bladesftp
24-06-2006, 09:20 PM
this happed to me only last night my box was losing all settings (musta drunk too much) i just assumed that my scan.conf and neuntrino config files had become corrupt so i just reflashed as it was the easiest option for me :)

renwich
24-06-2006, 09:21 PM
u could try re entering your net-id scan info then reboot

fergalsworld
24-06-2006, 09:21 PM
Have you tried changing ucodes or camd's m8
like i suggested earlier.

karlosfandango
24-06-2006, 09:25 PM
ok changed ucode from 14 to built in and tried other cams but still the same. was hoping not to flash but maybe only option now. can i flash with just null modem cable?

renwich
24-06-2006, 09:28 PM
you can but i'd be much easier to get a new xover m8,

fergalsworld
24-06-2006, 09:30 PM
Try all the different ucodes and camds m8
not just one.
also if you are on a splitter take it out of the loop.
then do a scan then reload channel list in the service menu.
if you get a working channel press
red the blue and post the
ber,snr and sig readings approx will do.

karlosfandango
24-06-2006, 09:32 PM
tried everything now and without a xover am stuffed till tommorow so will update then.

fergalsworld
24-06-2006, 09:37 PM
So within 2 minutes of my post and yours you have tried what i suggested
i dont think so m8
simply because you have to reboot when changing ucodes
a scan takes 60 seconds or more.
.

Scotster
24-06-2006, 10:12 PM
Seems to be quite a few peeps with this frame of mind at the moment

OH MY GOD DID YOU SEE THE ARGENTINA GOAL!!!! holy sheeeet

sorry happened while typing lol

Scott =op

karlosfandango
25-06-2006, 10:39 AM
So within 2 minutes of my post and yours you have tried what i suggested
i dont think so m8
simply because you have to reboot when changing ucodes
a scan takes 60 seconds or more.
.

No fergals but I have been trying all day and have tried several ucodes and cams b4 scanning but to no avail. I thought maybe there might be something else I might be able to do.

Scotster
26-06-2006, 02:30 PM
Turn of Hardware Sections in the Misc menu
Turn off SPTS in Misc menu
Use ucode 001a
try evocam then newcam after you hvae tried the above

Do it in the above order that way you only need to reboot once.

Scott =op

karlosfandango
27-06-2006, 07:54 PM
Now have commando 4 up and running, couldn't ftp to dbox as it had locked up. But happy with commando 4 seems solid enuf with my services.