PDA

View Full Version : ROM11 RevB0B



Dreamer111
06-08-2007, 02:09 PM
Hi UK m8s

i am writing from Switzerland, trying to crack the dear nagra card...Anyone heard of RevB0B before? can't found much on google and as you here seem to be experst, i'll try here.

first of all, is above a n1 or n2 crypt?
which tools do i need? got infinity ubs ph?nix, nagraedit and some more proggis.
i always get the message reading eeprom failed. dont even get the one with the backdor

Message in nagraedit:
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 41 44 4D
ROM Revision: 011
EEPROM Revision: RevB0B
Reading ROM11 failed
Closing of COM1 was successful

Anyone know how to crack this card? or has anyone got the master-key?

cheers!

pabl00
06-08-2007, 06:56 PM
hi dreamer,

I got the same Problem with Rom11 RevB0B, i dunno how to open the card. I tryed everthing out nagraedit, xncs and more. I hope someone can help us to get the card working. I use Dynamite Plus programmer.


greetz
pabl0

twobeercans
06-08-2007, 08:40 PM
use an unlooper/glitcher and the rom11 BOD script. all things being eqaul it should open the card..


tbc

pabl00
06-08-2007, 11:07 PM
hi :-)

How can i open a Rom11 B08 card ?
i tried XNCS and follow the instruction for B08, but always
i start under dev as 4E69.. and press go it gives me some error:

Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 3412.12768907407 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Encrypted Send Mehtod..
3) Encrypting Ecm...
--------------------------------------------------------------------
Set_Ifs Error!
ChkBC: C=01 from card should be C=D2.
Set_Ifs Error!
ChkBC: C=01 from card should be C=D2.
Set_Ifs Error!
ChkBC: C=01 from card should be C=D2.

provider is: 7201

thx for any help

greetz
pabl0

Dreamer111
07-08-2007, 11:50 AM
which unlooper? do i need an unlooper for nagra 1? Where do i get these scripts?
thanks for any help. hearing that my provodier will be chaning his crypt within 12 months...

twobeercans
17-08-2007, 09:21 PM
the cheapest and one of the most reliable unloopers currently sold in the uk is sold by TMC. in liecester. google powersync and you should get a link to there site.

tbc

ps i am sorry i do not post direct links on the board to sales sites of anykind. but you will find it if you look.

specter
18-08-2007, 09:05 PM
use an unlooper/glitcher and the rom11 BOD script. all things being eqaul it should open the card..
tbc

Yes, its works with the ROM11 BOD script :-)

cartergie
19-08-2007, 05:41 PM
what is the latest rom 11 version

Dreamer111
04-09-2007, 12:00 PM
Hi Specter
Thanks for your help...
Gretz from Swizzy