PDA

View Full Version : Eurovox - only some channels after scan



Alex Parx
30-06-2007, 08:49 PM
Hi

After power scanning I only get about a third of the available channels on my Eurovox. I've checked the frequencies and modulator setting for my region (nearest is Northampton), but after doing a manual scan on this frequency I only get about 6 extra channels.

I thought scanning on the correct frequency should produce all available channels. Why are there 30 listed on the Eurovox? Could someone explain.

Thanks, Alex:werd:

johno63
12-09-2007, 06:31 AM
try doing a power scan

mobzzuk
15-01-2008, 02:21 PM
you might need a signal booster. same happened to me when i first got mine only a handful of channels came but was told to use a signal booster that did the trick worked like magic

robo209
09-07-2009, 03:01 PM
Make sure you take out any splitters you may have and run the direct cable feed to your box.

What signal strength do you have.

Mines about 80 %


Best of luck