PDA

View Full Version : Me agian



pzibianfi
21-06-2006, 08:36 PM
I busy today hehe

Anyway just soft looped a card it was a rom 11 boc now says the following in nagra

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 43 3B
ROM Revision: 011
EEPROM Revision: RevB0C
ProviderID: 00
CamID: 17 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

is this nackered on can i at leat write an image to it

thesparky
21-06-2006, 08:40 PM
providerID 00
that would suggest its soft looped m8
but try reset and repair in mrom this might clean card but you will lose all your keys on it

pzibianfi
21-06-2006, 08:57 PM
Where do i get this mrom i dont mind if i loose the details on the card, i have nagra 3 and , rom studio 1.6 and 2.4 and xncs 1.8 but i aint heard of mrom!!

edcase
21-06-2006, 09:56 PM
MROM can be found in the downloads section here:
http://world-of-digital.com/forums/mosc-files/551-rev7-latest-version-mrom.html

You may have to fiddle with the delays in order to get it to work, I wouldn't hold up much hope of it repairing that card, but I guess you have nothing to lose.

edcase

thesparky
21-06-2006, 10:04 PM
you will need to ask for the password
try theses delays
Tx_Delay = 20
Rx_Delay = 80
Loop_Delay = 80

pzibianfi
21-06-2006, 10:40 PM
unable to access the downloads at the moment not eneogh posts i guess

:-(

edcase
21-06-2006, 11:59 PM
Make a couple more posts around the place, its not so hard, with so many forums on here, then send a private message to a moderator and ask them for the password for the downloads section.

edcase