PDA

View Full Version : fun4 chaos V3 unsubscribed channels



abc12345abc
06-06-2007, 10:36 AM
i posted this elsewhere but didnt want to hijack a thread.

i have 2 4001N's both using Fun4, one box works fine, the other dont, i created Ext using toxic checked BK & iRD saved hex as .bin
I erased card, put new bin file as Ext and chaos V3 pure as flash then wrote it to the card using infin, i did exactly the same to my sons box and it works get all channels etc, but this other box i just get "unsubscribed channel"... rebooted it, left it on for 24 hours still no update any ideas plz?

fergalsworld
06-06-2007, 11:56 AM
i posted this elsewhere but didnt want to hijack a thread.
i have 2 4001N's both using Fun4, one box works fine, the other dont, i created Ext using toxic checked BK & iRD saved hex as .bin
I erased card, put new bin file as Ext and chaos V3 pure as flash then wrote it to the card using infin, i did exactly the same to my sons box and it works get all channels etc, but this other box i just get "unsubscribed channel"... rebooted it, left it on for 24 hours still no update any ideas plz?
Try using RHv11 to create your exteeprom if that dont work try putting the correct details
in either k0 or k1 and leave the other one all zero's and see if they clear then.

abc12345abc
06-06-2007, 12:07 PM
hi Fergal, thanks mate.
Try using RHv11 to create your exteeprom
Where do i get correct details for K0 or K1? i assume they are new keys?

fergalsworld
06-06-2007, 12:25 PM
hi Fergal, thanks mate.
Try using RHv11 to create your exteeprom
Where do i get correct details for K0 or K1? i assume they are new keys?
You can get them of the other card read the ext save it drag it over swapbinhex and let go it will create a bin file open it with toxic or rhv11.
You will have to write the flash to the card again as reading the ext erases the flash.

abc12345abc
07-06-2007, 01:47 PM
Im so baffed, i tried so many times... My Net ID is 00005
tried erasing card 3 or 4 times both flash ext eep etc, wrote chaos V3 as flash created bin image using the correct BK & IRD which i triple checked, even had friend check it. wrote chaosV3 to flash and ext to ext. won't update reboot left it 24 hours..
i used RHv11, toxic & nagra to create Ext bin file none work...
any clues ?

fergalsworld
07-06-2007, 01:56 PM
Im so baffed, i tried so many times... My Net ID is 00005
tried erasing card 3 or 4 times both flash ext eep etc, wrote chaos V3 as flash created bin image using the correct BK & IRD which i triple checked, even had friend check it. wrote chaosV3 to flash and ext to ext. won't update reboot left it 24 hours..
i used RHv11, toxic & nagra to create Ext bin file none work...
any clues ?
You did write ext first and the flash last.
did you try putting the correct details in k0 or k1

abc12345abc
07-06-2007, 02:13 PM
na dont write files seperately, I just click "write" which writes whatever files i have selected in infinity which would be flash & ext? is that what im doign wrong?
Also, i dont need nothing in Int do i? once erased dont write anything to it?
Through fear of messing with my other fun4 im scared to read ext eeprom which will erase card to find K0 K1 and having both boxes off.. If my son dont get to see little einsteins etc my life wont be worth living LOL

DessertDog
07-06-2007, 03:33 PM
Try it the way fergals has said write the ex first then the flash and it should work.And nothing in int m8

fergalsworld
07-06-2007, 04:02 PM
na dont write files seperately, I just click "write" which writes whatever files i have selected in infinity which would be flash & ext? is that what im doign wrong?
Also, i dont need nothing in Int do i? once erased dont write anything to it?
Through fear of messing with my other fun4 im scared to read ext eeprom which will erase card to find K0 K1 and having both boxes off.. If my son dont get to see little einsteins etc my life wont be worth living LOL
Write the files separetly ext first then flash last
Reading the exteeprom only off the other card to get the details
will only erase the flash so just write only the flash back and it will be fine.

abc12345abc
10-06-2007, 11:14 AM
Cheers Guys, i bought a new fun4 and copied K0 over plus BK&IRD took 30 mins to update but is running fine. strange because that card i tried i am now using on mine.. baffled but hey my mum n son are happy ;)
thanks again!

abc12345abc
23-06-2007, 09:35 PM
Hi guys, well box was working fine, few days ago i stopped being able to watch sky movies, i just get family movie channel and that film4.. its updated to VM software
any clues plz?

fergalsworld
23-06-2007, 09:38 PM
Hi guys, well box was working fine, few days ago i stopped being able to watch sky movies, i just get family movie channel and that film4.. its updated to VM software
any clues plz?
Have a read of this thread
http://world-of-digital.com/forums/f21/needing-pin-sky-movies-14944.html

abc12345abc
23-06-2007, 09:49 PM
Blimming eck Fergal, do you just sit at your pc with finger on the button waiting for questions? your too good mate LOL cheers
I'll read that link now thanks :)

edited
do you mean have i set the pin up? i had gone into Eng menu long time ago and set the pin up 1111, it was working fine with pin request, i put 1111 in and got the movie until 2 days ago. I now dont get pin request anymore, ill read more on that thread see if theres anything else

abc12345abc
23-06-2007, 09:54 PM
seems i may have to purchase a Jtag solderless one for sure, then update macro or something?
Thats what i cant understand, i thought it had already updated...

just read redoing TB wont do anything either,

fergalsworld
23-06-2007, 10:01 PM
seems i may have to purchase a Jtag solderless one for sure, then update macro or something?
Thats what i cant understand, i thought it had already updated...

just read redoing TB wont do anything either,
When it updated to the latest vm that what stopped the pin
cos there is no mac you need v3 from tbc ocd and the 4000 macro look here
http://world-of-digital.com/forums/f63/

abc12345abc
23-06-2007, 10:25 PM
Ok, sorry for being a donut ;) so i need to get Jtag, then download 1:v3 from tbc,
2:the ocd
3:the 4000 macro?

fergalsworld
23-06-2007, 10:29 PM
Ok, sorry for being a donut ;) so i need to get Jtag, then download 1:v3 from tbc,
2:the ocd
3:the 4000 macro?
Yes but i dont know if the 4000 macro works with 4001N maybe someone else can confirm this.

abc12345abc
17-07-2007, 09:56 PM
where can i get a jtag pogo?
been searching around but cant seem to find a "pogo"..
is it called a pogo? lol I need that one becuase my soldering is pants!
Stephen Hawkins can solder better than me!

abc12345abc
29-07-2007, 06:51 PM
HI all, well i have got my pogo "eventually" and have downloaded the files i need apart from the BKE v 2.2, i have searched forums but nothing, is there something else i can use to load the driver or know where i can get this please?
Muchos Thankos :)

I got it, but wont say where from :)
NOW i got to get a Parallel to USB converter because i dont have a parallel connection...

abc12345abc
07-08-2007, 06:41 PM
Hi All, im totally stuck here, i d/l bke 2.2 but it doesnt have the mac_moc file driver??... Also i have a pace 4001N & 4010 but cant see where to connect jtag to on these boxes the tut for pogo jtag is for a 4000??, is there a tut for these 4001n & 4010 boxes please?
thanks

fergalsworld
07-08-2007, 07:06 PM
Hi All, im totally stuck here, i d/l bke 2.2 but it doesnt have the mac_moc file driver??... Also i have a pace 4001N & 4010 but cant see where to connect jtag to on these boxes the tut for pogo jtag is for a 4000??, is there a tut for these 4001n & 4010 boxes please?
thanks
Files here
http://world-of-digital.com/forums/f63/jtag-driver-files-5982.html

abc12345abc
07-08-2007, 09:10 PM
Thanks Fergal, saved me agin :)
Do you know if i can use pogo Jtag on a Pace 4001? I cant see where to connect it and cant find a TUT for it either, the tut i have says "for all 4000 series" but only has a pic of the 4010N..
ill get there in the end :)
Thanks again mate!!!!!!!

fergalsworld
07-08-2007, 10:38 PM
Do you know if i can use pogo Jtag on a Pace 4001? I cant see where to connect it and cant find a TUT for it either, the tut i have says "for all 4000 series" but only has a pic of the 4010N..
ill get there in the end :)
Thanks again mate!!!!!!!
After having a search around i dont think there is a fix for the 4001N to get the pin working could be wrong though.

twobeercans
09-08-2007, 05:54 PM
the 4001 nvram can only be programmed by piggybacking the nvram chip on the 4001 onto a 4000 or 4010 box. << tbh its very crude and as likely to do more harm than good to the box if you are not quite skilled.

i am sure there will be a firmware update in the not so distant future to resolve the 4001 pin issue, due to the inability to browse the now and next features.. so i think they will hacve to go back to masking and give us access as well lol..


tbc

abc12345abc
16-08-2007, 02:17 PM
Thanks mate, Last weekend the other box's "4010" in pure area the movies just came back on with pin, but obviously mine didn't lol...
Do you know where i could find the Macro Tutorial???
I got the mac file Ocd etc but want to follow it properly before i screw this up :)
thanks