PDA

View Full Version : Help with Telnet command



jbvid
26-05-2007, 02:03 PM
Hi
Running a 7025 with gemini2 2.30. I am able to backup an image to temp folder on the 7025 using the telnet command in the above 'dreambox helpfiles and telnet commands' by timoweb but when I try to load back a different image I get (-sh: eraseall: not found) is the command maybe different for the 7025 ? anyone any ideas?
jbvid

LDA
26-05-2007, 04:28 PM
The 7025 uses NFI files not IMG.

If you have a backup NFI file, eg backup.nfi do the following.

Connect LAN cable from your router/network to the Dreambox

Power off Dreambox
Power on and hold the channel down button on the front of the box until you see DHCP IP 192.168.x.x on the front panel.

Lets say your dreambox IP is 192.168.1.3

In your web browser enter http://192.168.1.3
Hit Enter key.

Now follow the instructions on screen to reflash.

Timoweb
04-06-2007, 12:40 PM
Hi
Running a 7025 with gemini2 2.30. I am able to backup an image to temp folder on the 7025 using the telnet command in the above 'dreambox helpfiles and telnet commands' by timoweb but when I try to load back a different image I get (-sh: eraseall: not found) is the command maybe different for the 7025 ? anyone any ideas?
jbvid
The telnet i posted is for a 500c m8. Yes the code is different for a 7025.