PDA

View Full Version : how to erase ntl card



stlark
23-05-2007, 01:36 PM
hi, i've got my hands on a ntl card and i want to erase it and put my box info on it. cant seem to erase it? please help.

telboy
23-05-2007, 09:13 PM
first off is it definately open ie whats it say when trying to read it in nagra , chances are it may be locked bod,a82,86 etc etc. if you can get into it then simply write your new image over it.

stlark
24-05-2007, 02:16 PM
thanks for your reply, this is what is displayed in nagra 4.1

Opening of COM2 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 43 3B
ROM Revision: 011
EEPROM Revision: RevB0C
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM2 was successful.

ascum
24-05-2007, 04:29 PM
Your card is locked.:locked:

Start searching / reading + get your self unlooper.

stlark
25-05-2007, 03:00 PM
thanks for the info, i will try and get the t911 on ebay.

Gavina
26-05-2007, 03:06 PM
I use a funcard as it seems easier to program. Are there any advantages in using a MOSC?

BakkiPoucH
01-06-2007, 12:41 PM
I use a funcard as it seems easier to program. Are there any advantages in using a MOSC?

not in my eyes

they all give u the channels u want just that mosc USED to last longer

slimithy
04-06-2007, 11:18 PM
I use a funcard as it seems easier to program. Are there any advantages in using a MOSC?
Put it this way...
funcards are easier to program, are the first to be fixed after a hit, when they are hit you only need to reprogram the flash, only need a USB to program, only need 1 program (software) to program it, cant be locked or fried and only cost around a fiver

unfortunetly i use a tit2 :(

starbuck
05-06-2007, 12:01 AM
Put it this way...
funcards are easier to program, are the first to be fixed after a hit, when they are hit you only need to reprogram the flash, only need a USB to program, only need 1 program (software) to program it, cant be locked or fried and only cost around a fiver
unfortunetly i use a tit2 :(

hi there iv got a tit card and fun cards with an ntl box how do i go about getting the tit card or funcard to work in my ntl box.any info would be very greatful...

slimithy
05-06-2007, 10:56 AM
thats a question you need to ask in the funcard forum mate, it will only get deleted here
but there are plenty of guides here, you just need to be able to access them

master
14-06-2007, 12:47 PM
Before you look at fixing the cards do you know what the IRD and BK numbers are? If not is any one of the tit2 or fun cards paired with the box?

ambo
09-07-2007, 11:41 AM
once you manage to unlock a card...just do a one step clean in nagraedit and that should do it. But remember to back up your rom11 image first.

bamisto2
09-07-2007, 07:15 PM
just an info m8 never fully clean your card one step is ok if you don't wanna any trouble will arrive after that.